Bedienungsanleitung Makita bmr 100 (Seite 10 von 19) (Englisch, Holländisch)

407552

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

6. Press and hold down buzzer alarm button for

more than 2 seconds followed by a beep to switch on

or off the HWS buzzer alarm.

Display will appear when buzzer alarm has

been set.

Snooze function

1. Whilst the alarm is activated, pressing any buttons

except the Power Button will activate the snooze

function. The radio or HWS buzzer alarm will be

silenced with interval of 5 minutes.

2. The display will flash both the snooze symbol and

the alarm symbol. The snooze function can be

repeatedly during one hour that the alarms are active.

Sleep function

The sleep timer will automatically switched off the radio

after a preset time has elapsed.

1. Press and continue to hold down the Power button for

more than 2 seconds, followed by a beep tone, the

display will cycle through the available sleep times in

the order 60-45-30-15-120-90-60.

Release the Power button when the required sleep

time appears in the display. The symbol will

appear in the display and the radio will play the last

station selected.

2. To cancel the sleep function, press the Power button.

The Symbol will disappear and radio is off.

Display illumination

Press any buttons or rotate tuning/volume control will

illuminate the LCD display for approx. 15 seconds. During

scanning stations and alarm activated, will also

automatically illuminate the display.

Setting tuning step

Tuning steps on some countries are different from where

you purchase the radio. If you buy the radio in Europe and

intend to use in Northern America or some Southern

American countries, you may have to adjust tuning step

so the radio may continue to serve you well.

While radio is switched off, long pressing Step/Band

button for more than 2 seconds will first show current FM

tuning step.

Continue pressing Step/Band button for approx. another

5 seconds until display FM and 50 kHz (tuning step)

flashing followed by a beep. By rotating the Tuning

control, you may adjust to 100 kHz per tuning step.

After FM tuning step is reset, pressing Step/Band button

again, display will show AM (MW) and flash 9 kHz. By

rotating Tuning control, you may adjust to 10 kHz per

tuning step. Complete the setting by pressing Step/Band

button.

Change Stereo to Mono

When the stereo FM station reception is weak, you can

improve it by pressing Mono button for 2 seconds. The

sound is no longer in stereo and stereo indicator

disappears.

Headphone socket

A 3.5 mm headphone socket located in front of your radio

is provided for use with either headphones or an

hairpiece. Inserting a plug automatically mutes the

internal speaker.

Specifications:

Power Requirements

AC power adaptor DC12V 700mA, center pin positive

Battery UM-3 (AA size) x 2 for back up

Cluster battery: 9.6 - 18V

Slide battery: 9.6 - 24 V

Frequency coverage: FM 87.50 - 108 MHz

AM (MW) 522 - 1629 kHz

(9 kHz/step)

Circuit feature

Loudspeaker 3 inches 8 ohm

Output Power 9.6V: 0.8 W x 2, 12V: 1.2 W x 2

14.4V: 2W x 2, 18V: 3W x 2

24V: 5W x 2

Headphone socket 3.5 mm dia.

Antenna system FM: soft bended rod antenna

AM: bar antenna

Dimension (W x H x D) in mm:

263 x 305 x 166

Weight 4.2kg (without battery)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita bmr 100 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita bmr 100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info