Bedienungsanleitung Makita BO 3700 (Seite 4 von 11) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Norwegisch)

79031

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

ENGLISH

Explanation of general view

1 Clamper

2 Conventional type of abrasive

paper with pre-punched holes

3 Pad for conventional type of

abrasive paper

4 Punch plate

5 Conventional type of abrasive

paper without pre-punched

holes

6 Screws

7Screwdriver

8 Hook-and-loop type of

abrasive paper with

pre-punched holes

9 Pad for hook-and-loop type of

abrasive paper

10 Dust bag

11 Dust spout

12 Groove

13 Front fixing cardboard

14 Paper dust bag

15 Claws

16 Upper part

17 Notch

18 Guide

19 Switch trigger

20 Lock button

SPECIFICATIONS

Model BO3700

Pad size .................................................93 mm x 185 mm

Abrasive paper size ............................... 93 mm x 228 mm

Orbits per minute .................................................. 10,000

Overall length ......................................................254 mm

Net weight ..............................................................1.4kg

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Intended use

The tool is intended for the sanding of large surface of

wood, plastics and metal materials as well as painted

surfaces.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

Safety hints

For your own safety, please refer to the enclosed safety

instructions.

SPECIFIC SAFETY RULES

GEB021-1

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to sander safety rules. If you use this tool unsafely or

incorrectly, you can suffer serious personal injury.

1. Hold power tools by insulated gripping sur-

faces when performing an operation where

the cutting tool may contact hidden wiring or

its own cord.

Contact with a "live" wire will make

exposed metal parts of the tool "live" and shock the

operator.

2. Always use safety glasses or goggles. Ordi-

nary eye or sun glasses are NOT safety

glasses.

3. Hold the tool firmly.

4. Do not leave the tool running. Operate the

tool only when hand-held.

5. This tool has not been waterproofed, so do

not use water on the workpiece surface.

6. Ventilate your work area adequately when

you perform sanding operations.

7. Some material contains chemicals which may

be toxic. Take caution to prevent working

dust inhalation and skin contact. Follow

material supplier safety data.

8. Use of this tool to sand some products,

paints and wood could expose user to dust

containing hazardous substances. Use

appropriate respiratory protection.

9. Be sure that there are no cracks or breakage

on the pad before use. Cracks or breakage

may cause a personal injury.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in

this instruction manual may cause serious personal

injury.

OPERATING INSTRUCTIONS

Installing or removing abrasive paper

Important:

Always be sure that the tool is switched off and

unplugged before installing or removing the abrasive

paper.

For conventional type of abrasive paper with pre-

punched holes (standard equipment):

Press the clamper. Insert the paper end into the clamper,

aligning the holes in the paper with those in the pad.

Then release the clamper to secure the paper. Repeat

the same process for the other end of the base, maintain-

ing the proper paper tension. (Fig. 1)

For conventional type of abrasive paper without pre-

punched holes (available on the market):

Press the clamper. Insert the paper end into the clamper,

aligning the paper edges even and parallel with the sides

of the base. Then release the clamper to secure the

paper. Repeat the same process for the other end of the

base, maintaining the proper paper tension. Place the

punch plate (optional accessory) over the paper so that

the guide of the punch plate is flush with the sides of the

base. Then press the punch plate to make holes in the

paper. (Fig. 2)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita BO 3700 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info