Bedienungsanleitung Makita BO 3700 (Seite 5 von 11) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Norwegisch)

79031

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

For hook-and-loop type of abrasive paper with pre-

punched holes (optional accessory):

Remove the pad for the conventional type of abrasive

paper from the tool with a screwdriver. (Fig. 3)

Install the pad for the hook-and-loop type of abrasive

paper (optional accessory) on the tool. Tighten the

screws firmly to secure the pad. Remove all dirt or for-

eign matter from the pad. Attach the paper to the pad,

aligning the holes in the paper with those in the pad.

(Fig. 4)

CAUTION:

Always use hook-and-loop type of abrasive papers.

Never use pressure-sensitive abrasive paper.

Installing dust bag (Fig. 5)

Attach the dust bag onto the dust spout. The dust spout

is tapered. When attaching the dust bag, push it onto the

dust spout firmly as far as it will go to prevent it from com-

ing off during operation. For the best results, empty the

dust bag when it becomes about half full, tapping it lightly

to remove as much dust as possible.

Paper dust bag

To install the paper dust bag, place the paper dust bag on

the paper dust bag holder with its front side upward.

Insert the front fixing cardboard of the paper dust bag

into the groove of the paper dust bag holder. (Fig. 6)

Then press the upper part of the front fixing cardboard in

arrow direction to hook it onto the claws. (Fig. 7)

Insert the notch of the paper dust bag into the guide of

the paper dust bag holder. Then install the paper dust

bag holder set on the tool. (Fig. 8 & 9)

Switch action (Fig. 10)

CAUTION:

Before plugging in the tool, always check to see that the

switch trigger actuates properly and returns to the “OFF”

position when released.

To start the tool, simply pull the trigger. Release the trig-

ger to stop. For continuous operation, pull the trigger and

then push in the lock button. To stop the tool from the

locked position, pull the trigger fully, then release it.

Operation (Fig. 11)

Turn the tool on and wait until it attains full speed. Then

gently place the tool on the workpiece surface. Keep the

base flush with the workpiece and apply a light pressure

on the tool.

CAUTION:

• Never run the tool without the abrasive paper. You may

seriously damage the pad.

• Never force the tool. Excessive pressure may decrease

the sanding efficiency, damage the abrasive paper and/

or shorten tool life.

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

To maintain product safety and reliability, repairs, mainte-

nance or adjustment should be carried out by a Makita

Authorized Service Center.

ACCESSORIES

CAUTION:

These accessories or attachments are recommended for

use with your Makita tool specified in this manual. The

use of any other accessories or attachments might

present a risk of injury to persons. The accessories or

attachments should be used only in the proper and

intended manner.

If you need any assistance for more details regarding

these accessories, ask your local Makita service center.

• Abrasive paper

(with pre-punched holes)

• Hook-and-loop type of abrasive paper

(with pre-punched holes)

• Punch plate

• Hose 28-1.5

• Backing pad

(For use with hook-and-loop type of abrasive paper)

• Backing pad

(For use with conventional type of abrasive paper)

• Paper dust bag

• Paper dust bag holder

Grit 60 80 120 180 240

Use Coarse Medium Fine

Grit 60 80 120 180 240

Use Coarse Medium Fine

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita BO 3700 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info