Bedienungsanleitung Makita CG100D (Seite 11 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691771

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

11 ENGLISH

Direct lling

NOTICE: Make sure that 600 ml size holder

is attached to the holder joint and piston C is

attached to the rod. Do not use other type of

holder and piston for direct lling.

1. Remove the holder cap, nozzle, and rubber ring

from the holder.

►Fig.27: 1. Holder cap 2. Nozzle 3. Rubber ring

4. Holder

2. Push the rod handle all the way until it stops.

3. Insertthetipoftheholderintothecaulkingmate-

rial,andthenpulltherodhandleslowlytolltheholder

with the caulking material.

►Fig.28: 1. Holder

4. Attach the rubber ring, nozzle, and holder cap by

turningtheholdercaprmly.

►Fig.29: 1. Holder cap 2. Nozzle 3. Rubber ring

4. Holder

Caulking operation

Pull the trigger to feed the caulking material. Put one hand

under the holder to support the tool while operating it.

After the operation, wipe off the caulking material from

the tool. Be sure to remove the caulking material before

it becomes solid.

NOTE:

At the beginning of operation, set the speed

adjustingdialto"1"andpulltheswitchtriggerslowly

to check how much amount of caulking material is fed.

NOTE: Depending on the type and conditions of

caulkingmaterial,itmaynotbefedatlowspeed.In

thiscase,setthespeedadjustingdialhigher.

NOTE:Ifthecaulkingmaterialisnotfed,checkthe

following points:

• Thetipofcartridgenozzleisnotcutadequately.

•

Thecaulkingmaterialissolidandcloggedinthenozzle.

• Thecartridgeorpackageisdamaged.

• Thecaulkingmaterialisstiff.Warmthematerial

until it becomes soft.

• Theattachedpistonisnotappropriateforthe

type of caulking material.

MAINTENANCE

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before attempting to perform inspection or

maintenance.

NOTICE: Never use gasoline, benzine, thinner,

alcohol or the like. Discoloration, deformation or

cracks may result.

TomaintainproductSAFETYandRELIABILITY,

repairs,anyothermaintenanceoradjustmentshould

be performed by Makita Authorized or Factory Service

Centers, always using Makita replacement parts.

OPTIONAL

ACCESSORIES

CAUTION: These accessories or attachments

are recommended for use with your Makita tool

specied in this manual.Theuseofanyother

accessories or attachments might present a risk of

injurytopersons.Onlyuseaccessoryorattachment

for its stated purpose.

Ifyouneedanyassistanceformoredetailsregard-

ing these accessories, ask your local Makita Service

Center.

• PistonA

• PistonB

• PistonC

• PistonD

• PistonE

• 300mlsizeholderset

• 600mlsizeholderset

• 800mlsizeholderset

• Nozzle(for600mlsizeholder)

• Nozzle(for800mlsizeholder)

• Safetygoggles

• Makitagenuinebatteryandcharger

NOTE: Some items in the list may be included in the

toolpackageasstandardaccessories.Theymay

differ from country to country.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita CG100D Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info