Bedienungsanleitung Makita CG100D (Seite 10 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691771

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

10 ENGLISH

Installing or removing the rod and

piston

1. Inserttherodfromtherearsideofthetoolwithits

teeth facing down.

►Fig.13: 1. Long rod or black rod

NOTICE: For 600 ml size holder, use the long

rod. For 800 ml size holder, use the black rod.

2. Attach the piston with the screw.

►Fig.14: 1. Screw 2. Piston 3. Long rod or black rod

Toremovetherodandpiston,followtheinstallation

procedure in reverse.

Installing or removing 600 ml or 800

ml size holder

CAUTION: Secure the holder to the holder

joint rmly. Otherwise the holder may come off

during operation and may cause an injury.

Toinstalltheholder,turnitclockwisermlyuntilitstops

whileholdingtheholderjoint.

►Fig.15: 1. Holder

Toremovetheholder,followtheinstallationprocedure

in reverse.

OPERATION

Using cartridge

Preparing cartridge for use

1. Cut the tip of the cartridge nozzle so that the suit-

able amount of caulking material is fed.

►Fig.16: 1. Nozzle

2. Makeaholeontheprotectivelmwiththetipof

the nozzle.

►Fig.17: 1. Nozzle

3. Attach the nozzle to the cartridge.

NOTICE: Be sure to check the cartridge for

damage before installation. Using the damaged

cartridge may cause malfunction.

NOTICE: When reusing the partially used car-

tridge, be sure to remove the solid caulking mate-

rial before the installation.

Installing cartridge to 300 ml size holder

NOTICE: Make sure that piston A is attached

to the rod. Do not use other type of piston for

cartridge.

1. Pull the rod handle backward slowly until it stops.

►Fig.18: 1. Rod handle

2. Insertthecartridgeintotheholderasshowninthe

gure.

►Fig.19

3. Push the rod gently until the piston touches the

bottom of cartridge.

Toremovethecartridge,followtheinstallationproce-

dure in reverse.

Installing cartridge to 600 ml or 800

ml size holder

NOTICE: Make sure that piston A (for 600 ml

size holder) or piston D (for 800 ml size holder) is

attached to the rod. Do not use other type of pis-

ton for cartridge.

1. Remove the holder cap from the holder, and then

pull the rod handle backward slowly until it stops.

►Fig.20: 1. Holder cap 2. Rod handle

2. Insertthecartridgeintotheholder.

►Fig.21: 1. Holder

3. Attachtheholdercapbyturningitrmlywhile

holding the holder.

►Fig.22: 1. Holder cap 2. Holder

4. Push the rod gently until the piston touches the

bottom of cartridge.

Toremovethecartridge,followtheinstallationproce-

dure in reverse.

Using lm type package

Preparing package for use

Cut off the tip of the package.

►Fig.23

NOTICE: Be sure to check the package for dam-

age before installation. Using the damaged pack-

age may cause malfunction.

Installing lm type package to 600 ml

or 800 ml size holder

NOTICE: Make sure that piston B (for 600 ml

size holder) or piston E (for 800 ml size holder) is

attached to the rod. Do not use other type of pis-

ton for lm type package.

1. Remove the holder cap, nozzle, and rubber ring

from the holder.

►Fig.24: 1. Holder cap 2. Nozzle 3. Rubber ring

4. Holder

2. Pull the rod handle backward slowly until it stops.

3. Insertthepackageintotheholder.

►Fig.25: 1. Holder

4. Attach the rubber ring, nozzle, and holder cap by

turningtheholdercaprmly.

►Fig.26: 1. Holder cap 2. Nozzle 3. Rubber ring

4. Holder

5. Push the rod gently until the piston touches the

package.

Toremovethepackage,removetheholdercap,nozzle,

rubber ring, and then push the rod handle forward until

it stops.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita CG100D Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info