Bedienungsanleitung Makita CL104D (Seite 8 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

600673

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

2. Do not allow to be used as a toy. Close attention is

necessary when used by or near children.

3. Use only as described in this manual. Use only

manufacturer’s recommended attachments.

4. Do not use with damaged battery. If appliance is

not working as it should, has been dropped,

damaged, left outdoors, or dropped into water,

return it to a service center.

5. Do not handle appliance with wet hands.

6. Do not put any object into openings. Do not use

with any opening blocked; keep free of dust, lint,

hair, and anything that may reduce air flow.

7. Keep hair, loose clothing, fingers, and all parts of

body away from openings and moving parts.

8. Turn off all controls before removing the battery.

9. Use extra care when cleaning on stairs.

10. Do not use to pick up flammable or combustible

liquids, such as gasoline, or use in areas where

they may be present.

11. Use only the charger supplied by the

manufacturer to recharge.

12. Do not pick up anything that is burning or

smoking, such as cigarettes, matches, or hot

ashes.

13. Do not use without filters in place.

14. Do not charge the battery outdoors.

SAVE THESE INSTRUCTIONS.

This appliance is intended for household use.

ADDITIONAL SAFETY RULES

ENB106-3

1. Read this instruction manual and the charger

instruction manual carefully before use.

2. Do not pick up the following materials:

- Hot materials such as lit cigarettes or spark/

metal dust generated by grinding/cutting metal

- Flammable materials such as gasoline, thinner,

benzine, kerosene or paint

- Explosive materials like nitroglycerin

- Ignitable materials such as Aluminum, zinc,

magnesium, titanium, phosphorus or celluloid

- Wet dirt, water, oil or the like

- Hard pieces with sharp edges, such as wood

chips, metals, stones, glasses, nails, pins or

razors

- Powder to clot such as cement or toner

- Conductive dust such as metal or carbon

- Fine particle like concrete dust

Such action may cause fire, injury and/or property

damage.

3. Stop operation immediately if you notice anything

abnormal.

4. If you drop or strike the cleaner, check it carefully

for cracks or damage before operation.

5. Do not charge the cleaner close to dangerous

flammable materials such as gasoline, gas, paint

or adhesives.

6. Do not charge the cleaner on papers, cloth, carpet,

vinyl, etc. This may cause a fire.

7. Do not charge the cleaner in a dusty place.

8. Be sure no one is below when using the cleaner in

high locations.

9. Do not bring close to stoves or other heat

sources.

10. Do not block the intake hole or vent holes.

SAVE THESE INSTRUCTIONS.

IMPORTANT SAFETY

INSTRUCTIONS

ENC010-1

FOR BUILT-IN BATTERY

1. Before using built-in battery, read all instructions

and cautionary markings on (1) battery charger,

(2) battery, and (3) product using battery.

2. Do not disassemble built-in battery.

3. If operating time has become excessively shorter,

stop operating immediately. It may result in a risk

of overheating, possible burns and even an

explosion.

4. If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Do not short the built-in battery:

(1) Do not touch the terminals with any

conductive material.

(2) Avoid storing built-in battery in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose built-in battery to water or

rain.

A battery short can cause a large current

flow, overheating, possible burns and even a

breakdown.

6. Do not store the tool and built-in battery in

locations where the temperature may reach or

exceed 50°C (122°F).

7. Do not incinerate the built-in battery even if it is

severely damaged or is completely worn out. The

built-in battery can explode in a fire.

8. Be careful not to drop or strike battery.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

1. Charge the built-in battery before completely

discharged.

Always stop tool operation and charge the built-in

battery when you notice less tool power.

2. Never recharge a fully charged built-in battery.

Overcharging shortens the battery service life.

3. Charge the built-in battery with room temperature

at 10°C - 40°C (50°F - 104°F). Let a hot built-in

battery cool down before charging it.

4. Charge the battery cartridge once in every six

months if you do not use it for a long period of

time.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off before

adjusting or checking function on the tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita CL104D Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info