Bedienungsanleitung Makita DCL282F (Seite 13 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

690517

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

13 ENGLISH

Disposing of dust

CAUTION: Empty the cleaner before it

becomes too full, or the suction force weakens.

CAUTION: When closing the front cover, be

careful not to pinch your ngers.

NOTICE: Never throw away the dust stopper

because it should be used whenever either the

dust bag or the paper lter is used.

NOTICE: When the dust bag/paper lter is not

inside of the cleaner, the front cover does not

close completely. Do not force to close the front

cover. It may result in deforming or breakage of

the tool.

NOTICE: When disposing of dust, also clean the

room for the dust bag/paper lter. The remaining

dust and dirt in the room may cause the sponge lter

to be clogged or the motor to be damaged.

Push the button to open the front cover. Opening it

until a click is heard allows a positive stop at that position.

► Fig.32: 1. Front cover 2. Button

2. Pull out both the orange-colored dust stopper and

dust bag/paper lter together at the same time.

► Fig.33: 1. Dust stopper

3. Perform the procedures below depending on the

dust container type:

When using the dust bag

Remove the dust stopper and empty the dust bag.

► Fig.34: 1. Dust stopper 2. Dust bag

When using the paper lter

Remove the dust stopper and dispose of the paper lter.

► Fig.35: 1. Dust stopper 2. Paper lter

4. Place the dust bag/new paper lter and dust stop-

per together into the cleaner and close the front cover.

NOTE: The cleaner is constructed in such a way that

the front cover comes off when trying to force the

front cover open at the angle of more than 90°. If the

front cover comes off, insert it into the front cover joint

in place.

► Fig.36: 1. Front cover 2. Front cover joint

MAINTENANCE

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before attempting to perform inspection or

maintenance.

To maintain product SAFETY and RELIABILITY,

repairs, any other maintenance or adjustment should

be performed by Makita Authorized or Factory Service

Centers, always using Makita replacement parts.

NOTICE: Never use gasoline, benzine, thinner,

alcohol or the like. Discoloration, deformation or

cracks may result.

After use

NOTICE: Putting the cleaner against the wall

without any other support cause the cleaner to

fall down and be damaged.

► Fig.37

Cleaning

Cleaner body

From time to time wipe off the outside (cleaner body) of

the cleaner using a cloth dampened in soapy water.

Clean out also the suction opening, dust bag/paper lter

mounting area and the dust stopper.

► Fig.38

Dust bag

Wash the dust bag in soapy water when it is clogged with

dust and the cleaner power becomes weak. Dry it out thor-

oughly before use. An insufciently dried lter may cause

poor suction and shorten the service life of the motor.

► Fig.39

NOTE: Paper lter is a throw-away type.

When the sponge lter is clogged with dust, remove it

from the cleaner and then wipe it off or wash in water.

Dust stopper

Wipe dust off from the dust stopper.

Remove dust and dirt on the sponge part by lightly tapping it.

► Fig.40: 1. Sponge part

Removing and installing the sponge lter

CAUTION: After cleaning sponge lter, be

sure to install it on the cleaner. If washed in water,

dry it up before installing. An insufciently dried

sponge lter may shorten the service life of the motor.

To remove the sponge lter, remove the dust bag or

paper lter and then pinch and take the sponge lter out.

► Fig.41: 1. Sponge lter

Press in the whole edge of the sponge lter against the

recessed wall inside the dust bag/paper lter mounting area.

► Fig.42: 1. Recessed wall

Wall mount for cordless cleaner

Optional accessory

NOTE:

The screw to mount the holder is not included.

Prepare a screw which ts with the material to screw into.

Attach the wall mount for cordless cleaner to a hard wooden wall,

beam or column, where the wall mount for cordless cleaner can

be rmly secured. Always be sure that the wall mount for cordless

cleaner is securely attached before hanging the cleaner.

► Fig.43: 1. Wall mount for cordless cleaner

CAUTION: Do not hang the cleaner to the wall

mount violently or hang other appliances than the

cleaner.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DCL282F Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info