Bedienungsanleitung Makita DHR182 (Seite 17 von 152) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691040

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

17 ENGLISH

Removing the drill bit

Toremovethedrillbit,pullthechuckcoverdownallthe

way and pull the drill bit out.

►Fig.25: 1. Bit 2. Chuck cover

Removing the dust cup set

Toremovethedustcupset,followthestepsbelow.

1. Loosen the side grip.

►Fig.26: 1. Side grip

2. Hold the root of dust cup and pull it out.

►Fig.27: 1. Dust cup

NOTE:Ifitisdifculttoremovethedustcupset,

remove the claws of the dust cup one by one by

swinging and pulling the root of the dust cup.

NOTE: If the cap comes off from the dust cup, attach

it with its printed side facing up so that groove on the

captsintheinsideperipheryoftheattachment.

►Fig.28

Hook

Optional accessory

CAUTION: Always remove the battery when

hanging the tool with the hook.

CAUTION: Never hook the tool at high loca-

tion or on potentially unstable surface.

►Fig.29: 1. Groove 2. Hook 3. Screw

Thehookisconvenientfortemporarilyhangingthetool.

Thiscanbeinstalledoneithersideofthetool.

Toinstallthehook,insertitintoagrooveinthetool

housing on either side and then secure it with a screw.

Toremove,loosenthescrewandthentakeitout.

Tool hanger

Optional accessory

CAUTION: Do not use damaged tool hanger

and screw. Before use, always check for dam-

ages, cracks or deformations, and make sure that

the screw is tightened.

CAUTION: Install or remove the tool hanger

on a stable table or surface. Be sure to use the

screw provided with the tool hanger only. After

installing the tool hanger, make sure that the tool

hanger is securely installed with the screw.

CAUTION: Do not remove the battery car-

tridge while hanging the tool.Thetoolmayfallifthe

screw is not tightened.

Thetoolhangerisintendedforconnectingthelanyard

(tetherstrap).Toinstallthetoolhangertothetool,

follow the steps below.

1. Remove the battery cartridge from the tool.

2. Attachthetoolhangerfromthebottomofthetool

asshowninthegure.

►Fig.30

3. Insert the protrusion of the tool hanger into the

groove on the left side of the tool.

►Fig.31: 1. Groove 2. Protrusion

NOTE:Thetoolhangercanbeinstalledinthedirec-

tionasshowninthegureonly.

4. Tightenthescrewrmly.

►Fig.32: 1. Screw

OPERATION

CAUTION: Always use the side grip (auxiliary

handle) and rmly hold the tool by both side grip

and switch handle during operations.

CAUTION: Always make sure that the work-

piece is secured before operation.

CAUTION: Do not pull the tool out forcibly

even the bit gets stuck. Loss of control may

cause injury.

CAUTION: The dust collection system is

intended for drilling in concrete only. Do not use

the dust collection system for drilling in metal or

wood.

CAUTION: When using the tool with the dust

collection system, be sure to attach the lter

to the dust collection system to prevent dust

inhalation.

CAUTION: Before using the dust collection

system, check that the lter is not damaged.

Failure to do so may cause dust inhalation.

CAUTION: The dust collection system col-

lects the generated dust at a considerable rate,

but not all dust can be collected.

NOTICE: Do not use the dust collection system

for core drilling or chiseling.

NOTICE: Do not use the dust collection system

for drilling in wet concrete or use this system

in wet environment. Failure to do so may cause

malfunction.

NOTE: If the battery cartridge is in low temperature,

the tool’s capability may not be fully obtained. In this

case, warm up the battery cartridge by using the

tool with no load for a while to fully obtain the tool’s

capability.

►Fig.33

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DHR182 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info