Bedienungsanleitung Makita DHS660 (Seite 17 von 148) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691827

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

17 ENGLISH

12. Do not attach lanyards to the tool in a way that

keeps guards, switches or lock-offs from oper-

ating properly.

13. Avoid getting tangled in the lanyard.

14. Keep lanyard away from the cutting area of the

tool.

15. Use multi-action and screw gate type cara-

bineers. Do not use single action spring clip

carabineers.

16. In the event the tool is dropped, it must be

tagged and removed from service, and should

be inspected by a Makita Factory or Authorized

Service Center.

►Fig.32: 1.Holeforlanyard(tetherstrap)

WIRELESS ACTIVATION

FUNCTION

For DHS661 only

What you can do with the wireless

activation function

The wireless activation function enables clean and com-

fortableoperation.Byconnectingasupportedvacuum

cleanertothetool,youcanrunthevacuumcleaner

automaticallyalongwiththeswitchoperationofthetool.

►Fig.33

To use the wireless activation function, prepare follow-

ing items:

• Awirelessunit(optionalaccessory)

• A vacuum cleaner which supports the wireless

activation function

The overview of the wireless activation function

setting is as follows. Refer to each section for detail

procedures.

1. Installing the wireless unit

2. Tool registration for the vacuum cleaner

3. Starting the wireless activation function

Installing the wireless unit

Optional accessory

CAUTION: Place the tool on a at and stable

surface when installing the wireless unit.

NOTICE: Clean the dust and dirt on the tool

before installing the wireless unit. Dust or dirt

maycausemalfunctionifitcomesintotheslotofthe

wireless unit.

NOTICE: To prevent the malfunction caused by

static, touch a static discharging material, such

as a metal part of the tool, before picking up the

wireless unit.

NOTICE: When installing the wireless unit,

always be sure that the wireless unit is inserted

in the correct direction and the lid is completely

closed.

1. Openthelidonthetoolasshowninthegure.

►Fig.34: 1. Lid

2. Insert the wireless unit to the slot and then close

the lid.

Wheninsertingthewirelessunit,aligntheprojections

with the recessed portions on the slot.

►Fig.35: 1. Wireless unit 2.Projection3. Lid

4. Recessed portion

Whenremovingthewirelessunit,openthelidslowly.

The hooks on the back of the lid will lift the wireless unit

asyoupullupthelid.

►Fig.36: 1. Wireless unit 2. Hook 3. Lid

After removing the wireless unit, keep it in the supplied

case or a static-free container.

NOTICE: Always use the hooks on the back of

the lid when removing the wireless unit. If the

hooks do not catch the wireless unit, close the lid

completelyandopenitslowlyagain.

Tool registration for the vacuum

cleaner

NOTE: A Makita vacuum cleaner supporting the

wireless activation function is required for the tool

registration.

NOTE: Finish installing the wireless unit to the tool

before starting the tool registration.

NOTE: During the tool registration, do not pull the

switch trigger or turn on the power switch on the

vacuum cleaner.

NOTE: Refer to the instruction manual of the vacuum

cleaner, too.

Ifyouwishtoactivatethevacuumcleaneralongwith

theswitchoperationofthetool,nishthetoolregistra-

tion beforehand.

1. Install the batteries to the vacuum cleaner and the

tool.

2. Setthestand-byswitchonthevacuumcleanerto

"AUTO".

►Fig.37: 1.Stand-byswitch

3. Press the wireless activation button on the vac-

uum cleaner for 3 seconds until the wireless activation

lamp blinks in green. And then press the wireless acti-

vationbuttononthetoolinthesameway.

►Fig.38: 1. Wireless activation button 2. Wireless

activation lamp

If the vacuum cleaner and the tool are linked success-

fully,thewirelessactivationlampswilllightupingreen

for 2 seconds and start blinking in blue.

NOTE:Thewirelessactivationlampsnishblinking

in green after 20 seconds elapsed. Press the wireless

activation button on the tool while the wireless acti-

vation lamp on the cleaner is blinking. If the wireless

activation lamp does not blink in green, push the wire-

lessactivationbuttonbrieyandholditdownagain.

NOTE: When performing two or more tool registra-

tionsforonevacuumcleaner,nishthetoolregistra-

tiononebyone.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DHS660 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info