Bedienungsanleitung Makita DHS660 (Seite 18 von 148) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691827

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

18 ENGLISH

Starting the wireless activation function

NOTE: Finish the tool registration for the vacuum

cleaner prior to the wireless activation.

NOTE: Refer to the instruction manual of the vacuum

cleaner, too.

After registering a tool to the vacuum cleaner, the

vacuumcleanerwillautomaticallyrunsalongwiththe

switch operation of the tool.

1. Install the wireless unit to the tool.

Connect the hose of the vacuum cleaner with the tool.

►Fig.39

Setthestand-byswitchonthevacuumcleanerto"AUTO".

►Fig.40: 1.Stand-byswitch

4. Push the wireless activation button on the tool

briey.Thewirelessactivationlampwillblinkinblue.

►Fig.41: 1. Wireless activation button 2. Wireless

activation lamp

5. Pull the switch trigger of the tool. Check if the

vacuum cleaner runs while the switch trigger is being

pulled.

To stop the wireless activation of the vacuum cleaner,

push the wireless activation button on the tool.

NOTE: The wireless activation lamp on the tool will

stop blinking in blue when there is no operation for

2hours.Inthiscase,setthestand-byswitchonthe

vacuum cleaner to "AUTO" and push the wireless

activation button on the tool again.

NOTE:Thevacuumcleanerstarts/stopswithadelay.

There is a time lag when the vacuum cleaner detects

a switch operation of the tool.

NOTE: The transmission distance of the wireless unit

mayvarydependingonthelocationandsurrounding

circumstances.

NOTE: When two or more tools are registered to one

vacuumcleaner,thevacuumcleanermaystartrun-

ningevenifyoudon'tpulltheswitchtriggerbecause

an other user is using the wireless activation function.

Description of the wireless activation lamp status

►Fig.42: 1. Wireless activation lamp

The wireless activation lamp shows the status of the wireless activation function. Refer to the table below for the

meaning of the lamp status.

Status Wireless activation lamp Description

Color

Blinking

Duration

Standby Blue

2 hours The wireless activation of the vacuum cleaner is available. The

lampwillautomaticallyturnoffwhennooperationisperformed

for 2 hours.

When the tool

is running.

The wireless activation of the vacuum cleaner is available and the

tool is running.

Tool

registration

Green

20 seconds Readyforthetoolregistration.Waitingfortheregistrationbythe

vacuum cleaner.

2 seconds Thetoolregistrationhasbeennished.Thewirelessactivation

lamp will start blinking in blue.

Cancelling

tool

registration

Red

20 seconds Readyforthecancellationofthetoolregistration.Waitingforthe

cancellationbythevacuumcleaner.

2 seconds Thecancellationofthetoolregistrationhasbeennished.The

wireless activation lamp will start blinking in blue.

Others Red

3 seconds The power is supplied to the wireless unit and the wireless activa-

tion function is starting up.

Off - - The wireless activation of the vacuum cleaner is stopped.

Cancelling tool registration for the

vacuum cleaner

Perform the following procedure when cancelling the

tool registration for the vacuum cleaner.

Install the batteries to the vacuum cleaner and the tool.

Setthestand-byswitchonthevacuumcleanerto"AUTO".

►Fig.43: 1.Stand-byswitch

Press the wireless activation button on the vacuum

cleaner for 6 seconds. The wireless activation lamp blinks

in green and then become red. After that, press the wire-

lessactivationbuttononthetoolinthesameway.

►Fig.44: 1. Wireless activation button 2. Wireless

activation lamp

Ifthecancellationisperformedsuccessfully,thewire-

less activation lamps will light up in red for 2 seconds

and start blinking in blue.

NOTE:Thewirelessactivationlampsnishblinkingin

red after 20 seconds elapsed. Press the wireless acti-

vation button on the tool while the wireless activation

lamp on the cleaner is blinking. If the wireless acti-

vation lamp does not blink in red, push the wireless

activationbuttonbrieyandholditdownagain.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DHS660 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info