Bedienungsanleitung Makita DMR112 (Seite 7 von 102) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

690927

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

7 ENGLISH

INSTALLATION AND POWER

SUPPLY

CAUTION:

●

Be careful not to pinch your ngers when opening

and closing the battery cover.

●

Return the battery compartment locker to the original

position, after installing or removing battery cartridge.

If not, battery cartridge may accidentally fall out of the

radio, causing injury to you or someone around you.

●

Always close and lock the battery compartment

locker before moving the radio.

●

Always switch off the radio before installing or

removing the battery cartridge.

●

Be careful not to drop or strike the radio. Broken

shell may slash your nger or stab your body.

Damaged radio may exhibit unpredictable behaviour

resulting in re, explosion or risk of injury.

IMPORTANT:

● Reduced power, distortion, “stuttering sound” or when

“POWERFAIL” appears on the display are all the signs

that the main battery pack needs to replace.

● The battery cartridge can’t be charged via the supplied

AC power adaptor.

● The battery cartridge is not included as standard

accessories.

Installing or removing Slide battery

cartridge (Fig. 2 & 3)

1. To install the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place. Always insert it all the way until it locks in

place with a little click.

2. If you can see the red indicator on the upper side of the

button, it is not locked completely. Install it fully until the

red indicator cannot be seen. If not, it may accidentally

fall out of the radio, causing injury to you or someone

around you.

3. Do not use force when installing the battery cartridge.

If the cartridge does not slide in easily, it is not being

inserted correctly.

4. To remove the battery cartridge, slide it from the radio

while sliding the button on the front of the cartridge.

Installing or removing Cluster battery

cartridge (Fig. 4 & 5)

1. To insert the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place.

2. To remove the battery cartridge, take the battery out of

the terminal while pressing the buttons on the side of

cartridge.

Indicating the remaining battery capacity

* Only for battery cartridges with “B” at the end of the

model number.

1. Indicator lamps 2. Check button

Press the check button on the battery cartridge to indicate

the remaining battery capacity. The indicator lamps light

up for few seconds.

● 14.4V/18V batteries

Indicator or lamps

Remaining Capacity

Lighted Off Blinking

75% ~ 100%

50% ~ 75%

25% ~ 50%

0% ~ 25%

Charge the battery

The battery may

have malfunctioned

● 10.8V-12V max batteries

Indicator or lamps

Remaining Capacity

Lighted Off Blinking

75% ~ 100%

50% ~ 75%

25% ~ 50%

0% ~ 25%

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DMR112 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info