Bedienungsanleitung Makita DMR112 (Seite 9 von 102) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

690927

Zoom out

Zoom in

Vorherige Seite

1/102

Nächste Seite

9 ENGLISH

d. Time & date Indicates the current time and date.

e. Frequency

and channel

Indicates the frequency and channel

number for the currently tuned DAB

station.

f . Bit rate/

Audio type

Indicates the digital audio bit rate

and audio type for the currently

tuned DAB station.

g. Signal strength Indicates the signal strength for the

currently tuned DAB station.

Finding new stations – DAB

From time to time, new DAB radio stations may become

available. Or you may have moved to a different part of

the country. In this case you may need to activate your

radio to scan for new stations.

To allow the radio to nd the available stations, it is

recommended to carry out a full scan of the entire DAB

Band III frequencies.

1. Press the Auto tune button.

2. Your radio will perform a full scan of the DAB

frequencies. As new stations are found, the station

counter on the left side in the display will increase and

stations will be added to the list.

Manual tuning – DAB

Manual tuning allows you to tune your radio to a particular

DAB frequency in Band III. This function can also be used

to assist the positioning of the antenna or the radio so as

to optimize reception for a specic channel or frequency.

1. Press the Advanced setting button and rotate the

Volume/Tuning Control/Select knob until “Manual

Tune” shown on the display. Press the Volume/Tuning

Control/Select knob to enter the manual tuning mode.

2. Rotate the Volume/Tuning Control/Select knob to

select the desired DAB channel. Press Volume/Tuning

Control/Select knob to conrm the chosen frequency.

Station order setup – DAB

Your radio has 3 station order settings from which you

can choose. The station order settings are alphanumeric,

ensemble and valid station.

1. Press the Advanced setting button.

2. Rotate the Volume/Tuning Control/Select knob until

“Station order” appearing on the display, then press the

Volume/Tuning Control/Select knob to enter the setting.

3. Rotate the Volume/Tuning Control/Select knob to select

the following options and press the knob to conrm the

setting.

Alphanumeric Sorts the station list alpha-numerically

0...9 A...Z

Ensemble Organizes the station list by DAB

multiplex

Valid Shows only those stations for which a

signal can be found

Dynamic Range Control (DRC) – DAB

DRC feature can make quieter sounds easier to hear

when your radio is used in a noisy environment by

reducing the dynamic range of the audio signal. There are

three levels of compression:

DRC 0 No compression applied.

DRC 1/2 Medium compression applied.

DRC 1 Maximum compression applied.

1. Press the Power button to switch on your radio.

2. Press the Band button to select the DAB band.

3. Press the Advanced setting button and rotate the

Volume/Tuning Control/Select knob until “DRC Value”

shown on the display. Then press the Volume/Tuning

Control/Select knob to enter the setting. The display

will show the current DRC value.

4. Rotate the Volume/Tuning Control/Select knob to select

desired DRC setting.

5. Press the Volume/Tuning Control/Select knob to

conrm the setting.

Scan Tuning – FM

1. Press the Power button to turn on the radio.

2. Select the desired waveband by pressing the Band

button. Make sure the soft bended rod antenna has

been well placed for best FM reception. Try to avoid

operating the radio next to a computer screen and

other equipment which will cause interference to the

radio.

3. Press the Auto tune button and the radio will search

and stop automatically when it nds a radio station.

The radio will continue searching for the next available

station unless the operator presses the Auto tune

button to stop the scanning.

4. Rotate the Volume/Tuning Control/Select knob to get

the desired sound level. The LCD display will show

sound level changes.

5. To turn off the radio, press the Power button.

FM scan zone

When using FM mode, your radio can be set to scan

either local stations or to scan all stations including distant

radio stations.

1. Press the Power button to turn on the radio.

2. Press the Band button to select the FM band.

3. Press the Advanced setting button and then rotate the

Volume/Tuning Control/Select knob until “FM Scan

Zone” shows on the display. Press the Volume/Tuning

Control/Select knob to enter the setting.

4. Rotate the Volume/Tuning Control/Select knob to

switch between “Local” (Strong stations only) and

“Distant” (All stations) options on the lower line of the

display. The Distant option will allow the radio to nd

weaker signals when scanning.

5. Press the Volume/Tuning Control/Select knob to

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DMR112 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info