Bedienungsanleitung Makita DRS780 (Seite 14 von 96) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691831

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

14 ENGLISH

Lanyard (tether strap) connection

Safety warnings specic for use at height

Read all safety warnings and instructions. Failure to follow

thewarningsandinstructionsmayresultinseriousinjury.

Always keep the tool tethered when working "at

height". Maximum lanyard length is 2 m (6.5 ft).

2. Use only with lanyards appropriate for this tool

type and rated for at least 6.5 kg (14.4 lbs).

3. Do not anchor the tool lanyard to anything on

your body or on movable components. Anchor

the tool lanyard to a rigid structure that can

withstand the forces of a dropped tool.

4. Make sure the lanyard is properly secured at

each end prior to use.

5. Inspect the tool and lanyard before each use

for damage and proper function (including

fabric and stitching). Do not use if damaged or

not functioning properly.

6. Do not wrap lanyards around or allow them to

come in contact with sharp or rough edges.

Fasten the other end of the lanyard outside the

working area so that a falling tool is held securely.

Attach the lanyard so that the tool will move away

from the operator if it falls. Dropped tools will swing on

thelanyard,whichcouldcauseinjuryorlossofbalance.

9. Do not use near moving parts or running

machinery.Failuretodosomayresultinacrush

orentanglementhazard.

10. Do not carry the tool by the attachment device

or the lanyard.

11. Only transfer the tool between your hands

while you are properly balanced.

12.

Do not attach lanyards to the tool in a way that keeps

guards, switches or lock-offs from operating properly.

13. Avoid getting tangled in the lanyard.

14.

Keep lanyard away from the cutting area of the tool.

15.

Use multi-action and screw gate type carabineers.

Do not use single action spring clip carabineers.

16.

In the event the tool is dropped, it must be tagged

and removed from service, and should be inspected

by a Makita Factory or Authorized Service Center.

►Fig.29: 1.Holeforlanyard(tetherstrap)

MAINTENANCE

CAUTION:

Always be sure that the tool is

switched off and the battery cartridge is removed before

attempting to perform inspection or maintenance.

CAUTION:

Clean out the upper and lower guards

to ensure there is no accumulated sawdust which may

impede the operation of the lower guarding system. A

dirtyguardingsystemmaylimittheproperoperationwhich

couldresultinseriouspersonalinjury.Themosteffective

waytoaccomplishthiscleaningiswithcompressedair.If

the dust is being blown out of the guards be sure the

proper eye and breathing protection is used.

NOTICE:

Never use gasoline, benzine, thinner, alcohol

or the like. Discoloration, deformation or cracks may result.

Adjusting 0°-cut accuracy

Thisadjustmenthasbeenmadeatthefactory.Butifitis

off,youcanadjustitasthefollowingprocedure.

1. Slightlyloosentheleverononthebevelscale

plate.

2. Make the base perpendicular to the blade using

atriangularruleorsquarerulebyturningtheadjusting

bolt.

►Fig.30: 1. Triangular rule 2.Adjustingbolt

3. Tighten the lever and then make a test cut to

check the verticalness.

To maintain product SAFETY and RELIABILITY,

repairs,anyothermaintenanceoradjustmentshould

beperformedbyMakitaAuthorizedorFactoryService

Centers,alwaysusingMakitareplacementparts.

OPTIONAL

ACCESSORIES

CAUTION: These accessories or attachments

are recommended for use with your Makita tool

specied in this manual.Theuseofanyother

accessories or attachments might present a risk of

injurytopersons.Onlyuseaccessoryorattachment

for its stated purpose.

Ifyouneedanyassistanceformoredetailsregard-

ingtheseaccessories,askyourlocalMakitaService

Center.

• Circular saw blade

• Wrench

• Ripfence(Guiderule)

• Makitagenuinebatteryandcharger

NOTE:Someitemsinthelistmaybeincludedinthe

toolpackageasstandardaccessories.Theymay

differfromcountrytocountry.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DRS780 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info