Bedienungsanleitung Makita DSC251 (Seite 6 von 26) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691890

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

6 ENGLISH

SAVE THESE INSTRUCTIONS

Meaning of “caution” and “warning” indications

Caution: Indicates a potentially hazardous situation

which, if not avoided, may result in minor

or moderate injury. This is also used to

alert against unsafe practices associated

with events that could lead to personal

injury.

Warning: Indicates a potentially hazardous situation

which, if not avoided, will result in death or

serious injury.

*** Makita shall not be responsible for any inci-

dental damages or personal injuries result-

ing from negligence of Warnings and Safety

Instructions contained in the Instruction

Manual.

Intended use

The tool is intended for cutting rebar.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745:

Sound pressure level (LpA) : 78 dB(A)

Uncertainty (K) : 3 dB(A)

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN60745:

Work mode: impact tightening of fasteners of the maxi-

mum capacity of the tool

Vibration emission (ah) : 2.5 m/s

Uncertainty (K) : 1.5 m/s

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE: The declared vibration emission value

may also be used in a preliminary assessment of

exposure.

WARNING: The vibration emission during actual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as the

times when the tool is switched off and when it is run-

ning idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

IMPORTANT SAFETY

INSTRUCTIONS

• The “important safety instructions” described

below should always be followed to reduce the

risk of a re, electric shock, and personal injury.

• Before operating the machine, read and carefully

follow these instructions.

• This manual should be retained for future

reference.

WARNING

1. Before use, read this Instruction Manual

thoroughly.

2. Use only the charger and battery specied in

this Instruction Manual.

· Any combination, except that specied in this

manual, may cause injury or damage due to

explosion.

3. Charge properly.

· Use this charger only with the rated AC power

supply. Do not use booster transformers or vehicle

generator, or use the charger to supply DC power.

Incorrect use may cause overheating and re.

· Do not charge the battery at a temperature under

10°C (50°F) or more than 40°C (104°F) as this

may cause an explosion or re.

4. Do not short-circuit the pins of the battery.

Avoid storing battery in a container with other

metal objects such as nails, coins, etc. This

may cause overheating, re and explosion due

to short-circuit.

5. Guard against an electric shock.

· Do not touch the power plug with a wet or damp

hands as this may result in an electric shock.

6. Consider the work area environment.

· Do not expose the charger and battery to rain or

use them in damp or wet locations, as this may

cause overheating or electric shock.

· Keep the work area well lighted. Working where

there is insufcient light may cause an accident.

· Do not use or charge the battery where there are

ammable uids or gases, as this may cause

explosion or re.

7. Wear Safety Glasses and Protective Clothing

· Always wear eye protection, dust mask, non-skid

safety shoes, helmet and any other mandated

or necessary protective clothing while using this

equipment. Failure to do so may result in injury.

8. Prevent unintentional starting.

· Ensure the switch is in the off-position before con-

necting to power source and/or battery pack, pick-

ing up or carrying the tool. Carrying power tools

with your nger on the switch invites accidents.

9. Secure the work.

· Use clamps or a vice to hold the work. This frees

both hands to properly hold, control, and operate

the tool. Failure to properly secure the work may

result in injury.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DSC251 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info