Bedienungsanleitung Makita DSC251 (Seite 7 von 26) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691890

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

7 ENGLISH

10. Disconnect the tools power supply, by remov-

ing the Battery and engaging the Trigger

Switch Lock, whenever one of the following

situations occur.

· The tool is not in use or is being serviced.

· Any parts, such as a blade, are being replaced.

· There is a recognised hazard.

Failure to do so may result in accidental operation

and damage or injury.

11. Only use the specied accessories or

attachments.

· Use only the accessories or attachments

described in this Instruction Manual and the

Makita catalog. Use of any other accessories or

attachments may result in an accident or injury.

12. Do not expose the battery to re as it may

explode or generate poisonous substances.

13. Under conditions of abuse, liquid may be

ejected from the battery; avoid contact.

· If contact accidentally occurs, ush with clear

water.

· If liquid contacts eyes, ush with clear water and

seek immediate medical help as it may result in

loss of eyesight.

14. If operating time has reduced very signi-

cantly, stop operating immediately. There is a

risk of overheating which may result in burns

and even an explosion.

CAUTION

1. Work area safety

· Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Keep Children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

3. Store idle power tools correctly.

· Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power

tool. Power tools are dangerous in the hands of

untrained users.

· Do not store the tool and battery in locations

where the temperature may reach or exceed 50°C

(122°F), such as a metal box or car in summer.

It may shorten the battery service life or result in

smoke and re.

4. Do not force power tools.

· Use the tool at the proper speed and for which the

tool was designed. Cutting too fast may result in

damage to the tool or personal injury.

· Do not use the tool in a way that could cause the

motor to lock. It may result in smoke or re.

5. Use the power tool for the right application.

· Use the power tool, its attachments and blades

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Do not use for a big tool operation.

Using for applications that are different from those

intended may result in personal injury.

6. Dress properly.

· Do not wear loose clothing or jewellery. Keep your

hair, clothing and gloves away from moving parts.

Loose clothes, jewelry or long hair can be caught

in moving parts.

· Wear rubber gloves and non-skid safety shoes

when operating a power tool outdoors. Slippery

gloves or shoes may result in a personal injury.

7. Do not abuse a cord of charger.

· Never use the cord for carrying, pulling or unplug-

ging the power tool.

· Keep cord away from heat, oil, sharp edges or

moving parts.

· Make sure a cord is located where it will not be

stepped on, tripped over, or otherwise subjected

to damage or stress. Damaged or entangled cords

increase the risk of electric shock or re.

8. Do not overreach.

· Keep proper footing and balance at all times. This

enables better control of the power tool in unex-

pected situations.

9. Maintain power tools.

· Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

Damaged blades may cause personal injury.

· Keep handles dry, clean and free from oil and

grease. Slippery handles may result in personal

injury.

· Check power cord of the charger regularly.

Damaged cord will increase risk of electric shock

or short circuit resulting in re.

10. Remove any adjusting key or wrench before

turning the power tool on.

· A wrench or key left attached to a rotating part of

the power tool may result in personal injury.

11. When charging outdoors, use a cabtyre cable

or a cabtyre extension cord.

· Use only the accessories or attachments

described in this Instruction Manual and the

Makita catalog. Use of any other accessories or

attachments may result in an accident or injury.

12. Stay alert, watch what you are doing and use

common sense when operating a power tool.

· Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or medica-

tion. A moment of inattention while operating

power tools may result in serious personal injury.

13. Check for damaged parts before use.

· Check safety covers and other parts that may

affect the tools function for breakage or damage. If

damaged, replace or repair before use.

· Check for misalignment or binding of moving

parts, breakage of parts and any other condition

that may affect the power tool’s operation. If dam-

aged, have the power tool repaired before use.

Many accidents are caused by poorly maintained

power tools.

· Do not use damaged extension cord. If damaged

replace it before use. Use of damaged extension

cord will increase risk of electric shock or short

circuit resulting in re.

Makita DSC251 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info