Bedienungsanleitung Makita DSC251 (Seite 10 von 26) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691890

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

10 ENGLISH

Tipped saw replacement

9. When replacing the Tipped Saw, ensure that the

battery is removed from the tool to prevent acci-

dental operation and personal injury.

10. Ensure there is no one in the surroundings before

operation and no abnormal sounds or abnormal

vibrations occur when operating. Operating with

abnormal sounds or abnormal vibrations can dam-

age the blades resulting in serious personal injury.

During operation

11. Do not use the Tipped Saw for any purpose other

than cutting. Do not subject the blades to damage

or stress. It can break the blades resulting in seri-

ous personal injury.

12. Hold the material rmly, in a vice or similar, so

that it cannot move when cutting. If the material

moves, the operation becomes unstable and

cannot be controlled, resulting in damage to the

blades and possible serious personal injury.

13. Start cutting only after the Tipped Saw has

reached maximum speed. If the Tipped Saw is set

against the material before the motor is started,

the blades will be overloaded and damaged,

resulting in possible serious personal injury.

14. Do not cut in zigzags, curves, diagonals, or use

the side of the blade to prise or for any other

purpose.

15. If during cutting, there is an abnormal sound,

abnormal vibration, or if the cutting parts are badly

worn, stop operation.

Continuing the operation under such conditions

will damage the Tipped Saw blades with the result

that chips may be ejected causing serious per-

sonal injury.

16. Continuous operation makes the Tipped Saw

blades hot and reduces the cutting performances.

Maintenance

17. If there is deformation, a crack or damage on the

Tipped Saw, stop the operation. Continuing the

operation under such conditions will further dam-

age the Tipped Saw which may break up. Ejected

broken parts can cause serious personal injury.

18. Only keep and use Tipped Saws that are in good

condition and the blades sharp and clean.

WARNING: Always wear protective equip-

ment; safety glasses, safety shoes, dust mask

and helmet.

WARNING: Use only Makita supplied Tipped

Saw. Using non Makita parts may damage the tool

and can result in serious accident or injury.

Important safety instructions for

battery cartridge

1. Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using

battery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them

out with clear water and seek medical atten-

tion right away. It may result in loss of your

eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any con-

ductive material.

(2) Avoid storing battery cartridge in a con-

tainer with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water

or rain.

A battery short can cause a large current

ow, overheating, possible burns and even a

breakdown.

6. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50 °C (122 °F).

7. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn

out. The battery cartridge can explode in a re.

8. Be careful not to drop or strike battery.

9. Do not use a damaged battery.

10. The contained lithium-ion batteries are sub-

ject to the Dangerous Goods Legislation

requirements.

For commercial transports e.g. by third parties,

forwarding agents, special requirement on pack-

aging and labeling must be observed.

For preparation of the item being shipped, consult-

ing an expert for hazardous material is required.

Please also observe possibly more detailed

national regulations.

Tape or mask off open contacts and pack up the

battery in such a manner that it cannot move

around in the packaging.

11. Follow your local regulations relating to dis-

posal of battery.

SAVE THESE INSTRUCTIONS.

CAUTION: Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that

have been altered, may result in the battery burst-

ing causing res, personal injury and damage. It will

also void the Makita warranty for the Makita tool and

charger.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DSC251 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info