Bedienungsanleitung Makita DTD171 (Seite 8 von 22) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691706

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

8 ENGLISH

Lighting up the front lamp

CAUTION: Do not look in the light or see the

source of light directly.

► Fig.4: 1. Lamp

► Fig.5: 1. Button

Pull the switch trigger to turn on the lamp. To turn off,

release it. The lamp goes out approximately 10 seconds

after releasing the switch trigger.

To keep the lamp off, turn off the lamp status. To turn off

the lamp status, rst pull and release the switch trigger.

And then press the button

within 10 seconds.

To turn on the lamp status again, press the but-

ton again similarly.

NOTE: When the tool is overheated, the light ashes

for one minute, and then the LED display goes off. In

this case, cool down the tool before operating again.

NOTE: To conrm the lamp status, pull the trigger.

When the lamp lights up by pulling the switch trigger,

the lamp status is ON. When the lamp does not come

on, the lamp status is OFF.

NOTE: Use a dry cloth to wipe the dirt off the lens of

the lamp. Be careful not to scratch the lens of lamp, or

it may lower the illumination.

Reversing switch action

► Fig.6: 1. Reversing switch lever

CAUTION: Always check the direction of

rotation before operation.

CAUTION: Use the reversing switch only after

the tool comes to a complete stop. Changing the

direction of rotation before the tool stops may dam-

age the tool.

CAUTION: When not operating the tool,

always set the reversing switch lever to the neu-

tral position.

This tool has a reversing switch to change the direction

of rotation. Depress the reversing switch lever from the

A side for clockwise rotation or from the B side for coun-

terclockwise rotation.

When the reversing switch lever is in the neutral posi-

tion, the switch trigger cannot be pulled.

Changing the application mode

What's the application mode?

The application mode is the variation of the driving

rotation and impact which are already preset in the tool.

By choosing a suitable application mode depending on

the work, you can accomplish quicker work and/or more

beautiful nish.

This tool features following application modes:

Impact force

• Max

• Hard

• Medium

• Soft

Assist type

• Wood mode

• Bolt mode

• T mode (1)

• T mode (2)

The application mode can be changed by the but-

ton

, , or the quick mode-switching button.

► Fig.7: 1. Quick mode-switching button

2. Button 3. Button

By registering a certain application mode to the tool,

you can switch to the registered application mode by

just pressing the quick mode-switching button (quick

mode-switching function).

NOTE: When none of the lamp on the panel is lit,

pull the switch trigger once before pressing the quick

mode-switching button.

NOTE: You will not be able to change the application

mode if you do not operate the tool for approximately

one minute. In this case, pull the switch trigger

once and press the

button, button, or quick

mode-switching button.

NOTE: Refer to "Registering the application mode"

in "Quick mode-switching function" section for how to

Quick mode-switching button

The function of the quick mode-switching button varies

depending on whether you have registered the applica-

tion mode to the tool.

► Fig.8: 1. Quick mode-switching button

When the application mode is not registered:

The level of impact force changes every time you press

the quick mode-switching button. The front lamps on

both sides will ash once when the impact force is

changed by pressing the quick mode-switching button.

When the application mode is registered:

The tool switches between the registered application

mode and current application mode every time you press

the quick mode-switching button. The front lamps on

both sides will ash once when the application mode is

changed by pressing the quick mode-switching button.

NOTE: When the lamp status is off, the lamps will not

ash even when the application mode is changed by

pressing the quick mode-switching button.

NOTE: Refer to "Registering the application mode"

in "Quick mode-switching function" section for how to

Disabling the quick mode-switching button

You can also disable the quick mode-switching button. After

disabling, the quick mode-switching button will not work for

changing the impact force and switching the application mode.

To disable the quick mode-switching button, press and

hold the quick mode-switching button and the but-

ton at the same time until the all lamps on the panel

blink.

To resume the quick mode-switching button, perform

the same procedure as above again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DTD171 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info