Bedienungsanleitung Makita DTD171 (Seite 10 von 22) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691706

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

10 ENGLISH

Changing assist type

This tool employs assist function that offers several easy-to-

use application modes for driving screws with good control.

The type of the application mode changes every time

you press the button .

You can change the assist type within approximately

one minute after releasing the switch trigger or press-

ing the button

, , or the quick mode-switching

button.

► Fig.10: 1. Button

Application mode

(Assist type displayed

on panel)

Maximum blows Feature Purpose

Wood mode *1

3,800 min

-1

(/min) This mode helps to prevent a screw from falling at

the beginning of driving. The tool drives a screw

with low-speed rotation at rst. After the tool starts

to impact, the rotation speed increases and reaches

the maximum speed.

Tightening long screws.

Bolt mode (reverse rota-

tion auto stop) *1 *2

3,800 min

-1

(/min) This mode helps to prevent a bolt from falling off.

When loosening a bolt with the tool driving in coun-

terclockwise rotation, the tool automatically stops

after the bolt/nut gets enough loosened. The stroke

of the switch trigger to reach maximum speed will

become short in this mode.

Loosening bolts.

T mode (1) *1

–

(The tool stops rotating

soon after impact starts.)

This mode helps to prevent the screws from

over-tightening. It also accomplishes quick oper-

ation and good nish at the same time. The tool

drives a screw with high-speed rotation and stops

soon after the tool starts to impact.

NOTE:

The timing to stop the driving varies depending

on the type of the screw and material to be

driven. Make a test driving before using this

mode.

Driving self-drilling

screws to a thin metal

plate with good nish.

T mode (2) *1

2,600 min

-1

(/min) This mode helps to prevent the screws from

breakage and stripping. It also accomplishes quick

operation and good nish at the same time. The tool

drives a screw with high-speed rotation and slows

down the rotation when the tool starts to impact.

NOTE:

Release the switch trigger as soon as the tight-

ening nished to avoid overtightening.

Driving self-drilling

screws to a thick metal

plate with good nish.

*1 : Automatic speed control works only when the switch trigger is fully pulled.

*2 : Reverse rotation auto stop works only when the tool is driving in counterclockwise rotation.

NOTE: When none of the lamp on the panel is lit, pull the switch trigger once before pressing the button

NOTE: All lamps on the switch panel go out when the tool is turned off to save the battery power. The type of the

application mode can be checked by pulling the switch trigger to the extent that the tool does not operate.

Quick mode-switching function

What you can do with the quick mode-

switching function

The quick mode-switching function saves the time for changing

the application mode of the tool. You can switch to your desired

application mode by just pressing the quick mode-switching

button. It is helpful when doing a repetitive work which requires

to switch between two application modes alternately.

EXAMPLE If you have a work to use T mode and max

impact force, register the max impact force for quick

mode-switching function. Once register it, you can switch

to the max impact force from T mode by just one click of

the quick mode-switching button. Also, you can return to T

mode by pressing the quick mode-switching button again.

Even if the tool is in other application mode than T

mode, pressing the quick mode-switching button

changes to max impact force. It is convenient for you

to register a application mode that you frequently use.

You can choose one of following application modes for

quick mode-switching function:

Impact force

• Max

• Hard

• Medium

• Soft

Assist type

• Wood mode

• Bolt mode

• T mode (1)

• T mode (2)

Registering application mode

To use the quick mode-switching function, register your

desired application mode to the tool beforehand.

1. With the button

or , choose your desired

application mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DTD171 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info