Bedienungsanleitung Makita DTR181 (Seite 15 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

793624

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

15 ENGLISH

17.

Be careful not to drop, bump, or hit the tool. If a

strong impact is applied prior to the tool being

used, make sure that the tool is not damaged

or cracked, and that the safety devices operate

normally. Otherwise, an accident may occur.

18.

If any of the following phenomena occur, lock

󰀨

remove the battery cartridge from the tool. If the

tool operates incorrectly, an accident may occur.

• If an operating sound is heard as soon as

the battery cartridge is mounted.

• If overheating or abnormal smells or

noises are detected.

• When you are taking measures in

response to the error display. (Ask your

local Makita Service Center for repairs.)

• When loading or unloading a wire reel.

• When you move while holding the tool

during work.

• When you do not use the tool.

• When you inspect or adjust the tool.

• When you remove a stranded wire.

19. 󰀨

it and work using a posture that will ensure

you maintain your balance.󰀨

unstable, an accident may occur.

20. When working on a roof or similar locations,

move in a forward direction while working so

that you can see where you are going. If you

move in a backward direction while working, you

may lose your footing and cause an accident.

21.

If you are working in a highly elevated location,

ensure that no one is below you, and pay atten-

tion to ensure you do not drop any tools while

working. Dropping the tool may cause an accident.

22. Do not use the tool for any work other than

wire tying. Otherwise, an accident may occur.

23. Always use Makita's genuine wires. If wires are

not used for a long period of time, they may

rust. Do not use rusted wires. Otherwise, they

may cause an accident.

24. After tying, check for wire breakage due to

excessive twisting. If any wires are broken,

tying strength will be lost. Adjust the tying

strength, and tie the rebars again.

25. Securely place the arm against the rebars. If

it is not securely positioned, a clearance will be

created between the rebars, and tying strength will

be compromised.

Important safety instructions for

battery cartridge

1. Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using

battery.

2. Do not disassemble or tamper with the battery

cartridge.

or explosion.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any con-

ductive material.

(2) Avoid storing battery cartridge in a con-

tainer with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water

or rain.

-

heating, possible burns and even a breakdown.

6. Do not store and use the tool and battery car-

tridge in locations where the temperature may

reach or exceed 50 °C (122 °F).

7. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn



8. Do not nail, cut, crush, throw, drop the battery

cartridge, or hit against a hard object to the

battery cartridge. Such conduct may result in a



9. Do not use a damaged battery.

10.

The contained lithium-ion batteries are subject to

the Dangerous Goods Legislation requirements.

For commercial transports e.g. by third parties,

forwarding agents, special requirement on pack-

aging and labeling must be observed.

For preparation of the item being shipped, consulting an

expert for hazardous material is required. Please also

observe possibly more detailed national regulations.

󰀨

battery in such a manner that it cannot move

around in the packaging.

11. When disposing the battery cartridge, remove

it from the tool and dispose of it in a safe

place. Follow your local regulations relating to

disposal of battery.

12. Use the batteries only with the products

 Installing the batteries to

-

sive heat, explosion, or leak of electrolyte.

13. If the tool is not used for a long period of time,

the battery must be removed from the tool.

14. During and after use, the battery cartridge may

take on heat which can cause burns or low

temperature burns. Pay attention to the han-

dling of hot battery cartridges.

15. Do not touch the terminal of the tool imme-

diately after use as it may get hot enough to

cause burns.

16. Do not allow chips, dust, or soil stuck into the

terminals, holes, and grooves of the battery

cartridge.

burst and malfunction of the tool or battery car-



17. Unless the tool supports the use near

high-voltage electrical power lines, do not use

the battery cartridge near high-voltage electri-

cal power lines. It may result in a malfunction or

breakdown of the tool or battery cartridge.

18. Keep the battery away from children.

SAVE THESE INSTRUCTIONS.

Makita DTR181 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info