Bedienungsanleitung Makita DTW285 (Seite 8 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch)

657985

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

8 ENGLISH

Impact force grade displayed

on panel

Maximum blows Application Work

Soft

1,800 min

-1

(/min) Tighteningwhenyouneedne

adjustmentwithsmalldiameter

bolt.

Assemblingfurnitures.

Reverse rotation auto stop

mode

3,500 min

-1

(/min) Loosening with auto stop

function.

Disassemblingbolts/nuts.

NOTE:Reverserotationautostopmodeisavailableonlywhenthetoolrotatescounterclockwise.Whenrotating

clockwise in reverse rotation auto stop mode, the impact force and speed are the same as Hard impact mode.

ASSEMBLY

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before carrying out any work on the tool.

Selecting correct impact socket

Alwaysusethecorrectsizeimpactsocketforboltsand

nuts.Anincorrectsizeimpactsocketwillresultininac-

curateandinconsistentfasteningtorqueand/ordamage

to the bolt or nut.

Installing or removing impact socket

CAUTION: Make sure that the impact socket

and the mounting portion are not damaged before

installing the impact socket.

CAUTION: After inserting the impact socket,

make sure that it is rmly secured. If it comes out,

do not use it.

For impact socket without O-ring

and pin

►Fig.10: 1. Impact socket 2. Square drive

Aligntheholeinthesideoftheimpactsocketwiththe

detent pin on the square drive and push the impact

socketontothesquaredriveuntilitlocksintoplace.Tap

it lightly if required.

Toremovetheimpactsocket,simplypullitoff.

For impact socket with O-ring

and pin

►Fig.11: 1. Impact socket 2. O-ring 3.Pin

Move the O-ring out of the groove in the impact socket

and remove the pin from the impact socket. Fit the impact

socket onto the square drive so that the hole in the impact

socket is aligned with the hole in the square drive.

Insert the pin through the hole in the impact socket and

squaredrive.ThenreturntheO-ringtotheoriginalposi-

tion in the impact socket groove to retain the pin.

Toremovetheimpactsocket,followtheinstallation

procedures in reverse.

Installing hook

►Fig.12: 1. Groove 2. Hook 3. Screw

Thehookisconvenientfortemporarilyhangingthetool.

Thiscanbeinstalledoneithersideofthetool.Toinstall

the hook, insert it into a groove in the tool housing on

eithersideandthensecureitwithascrew.Toremove,

loosen the screw and then take it out.

OPERATION

CAUTION: Always insert the battery cartridge

all the way until it locks in place. If you can see the

red indicator on the upper side of the button, it is not

locked completely. Insert it fully until the red indicator

cannot be seen. If not, it may accidentally fall out of

thetool,causinginjurytoyouorsomeonearound

you.

►Fig.13

Holdthetoolrmlyandplacetheimpactsocketover

theboltornut.Turnthetoolonandfastenfortheproper

fastening time.

Theproperfasteningtorquemaydifferdependingupon

thekindorsizeofthebolt,thematerialoftheworkpiece

tobefastened,etc.Therelationbetweenfastening

torqueandfasteningtimeisshowninthegures.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DTW285 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info