Bedienungsanleitung Makita DUC353 (Seite 9 von 128) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

690908

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

9 ENGLISH

Intended use

This chain saw is intended for sawing wood.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ingtoEN60745:

Model DUC303

Sound pressure level (L

):87.7dB(A)

Sound power level (L

):100.4dB(A)

Uncertainty(K):2dB(A)

Model DUC353

Sound pressure level (L

):87.7dB(A)

Sound power level (L

):100.4dB(A)

Uncertainty(K):2dB(A)

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

minedaccordingtoEN60745:

Model DUC303

Workmode:cuttingwood

Vibration emission (a

h,W

):5.3m/s

Uncertainty(K):1.5m/s

Model DUC353

Workmode:cuttingwood

Vibration emission (a

h,W

):5.3m/s

Uncertainty(K):1.5m/s

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE: The declared vibration emission value

may also be used in a preliminary assessment of

exposure.

WARNING: The vibration emission during actual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings, instruc-

tions, illustrations and specications provided

with this power tool. Failure to follow all instructions

listedbelowmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Cordless Chain saw safety warnings

Keep all parts of the body away from the saw

chain when the chain saw is operating. Before

you start the chain saw, make sure the saw chain

is not contacting anything.Amomentofinattention

while operating chain saws may cause entanglement

of your clothing or body with the saw chain.

2. Always hold the chain saw with your right

hand on the rear handle and your left hand on

the front handle. Holding the chain saw with a

reversedhandcongurationincreasestheriskof

personalinjuryandshouldneverbedone.

Hold the power tool by insulated gripping sur-

faces only, because the saw chain may contact

hidden wiring. Saw chains contacting a "live" wire

may make exposed metal parts of the power tool

"live" and could give the operator an electric shock.

4. Wear safety glasses and hearing protection.

Further protective equipment for head, hands,

legsandfeetisrecommended.Adequateprotec-

tiveclothingwillreducepersonalinjurybyying

debris or accidental contact with the saw chain.

5. Do not operate a chain saw in a tree. Operation

of a chain saw while up in a tree may result in

personalinjury.

Always keep proper footing and operate the chain

saw only when standing on xed, secure and level

surface. Slippery or unstable surfaces such as ladders

may cause a loss of balance or control of the chain saw.

When cutting a limb that is under tension be alert

for spring back.Whenthetensioninthewoodbres

is released the spring loaded limb may strike the

operator and/or throw the chain saw out of control.

Use extreme caution when cutting brush and sap-

lings. The slender material may catch the saw chain

and be whipped toward you or pull you off balance.

9. Carry the chain saw by the front handle with

the chain saw switched off and away from your

body. When transporting or storing the chain

saw always t the guide bar cover. Proper

handling of the chain saw will reduce the likelihood

of accidental contact with the moving saw chain.

10. Follow instructions for lubricating, chain ten-

sioning and changing accessories. Improperly

tensioned or lubricated chain may either break or

increase the chance for kickback.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DUC353 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info