Bedienungsanleitung Makita DUR188U (Seite 14 von 112) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

690922

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

14 ENGLISH

Indicating the remaining battery

capacity

Only for battery cartridges with the indicator

►Fig.6: 1. Indicator lamps 2. Check button

Press the check button on the battery cartridge to indi-

cate the remaining battery capacity. The indicator lamps

light up for few seconds.

Indicator lamps Remaining

capacity

Lighted Off Blinking

75% to 100%

50% to 75%

25% to 50%

0% to 25%

Charge the

battery.

The battery

may have

malfunctioned.

NOTE: Depending on the conditions of use and the

ambient temperature, the indication may differ slightly

from the actual capacity.

Power switch action

WARNING: Before installing the battery car-

tridge on the tool, always check to see that the

switch trigger actuates properly and returns to

the "OFF" position when released. Operating a tool

with a switch that does not actuate properly can lead

tolossofcontrolandseriouspersonalinjury.

CAUTION: Never put your nger on the

switch when carrying. The tool may start uninten-

tionallyandcauseinjury.

Press and hold the main power button for some sec-

onds to turn on the tool.

To turn off the tool, press and hold the main power

button again.

►Fig.7: 1. Main power button

To prevent the switch trigger from being accidentally

pulled, a lock-off lever is provided.

To start the tool, grasp the handle (the lock-off lever is

released by the grasp) and then pull the switch trigger.

To stop the tool, release the switch trigger.

DUR187U and DUR188U

►Fig.8: 1. Lock-off lever 2.Switchtrigger

DUR187L and DUR188L

►Fig.9: 1. Lock-off lever 2.Switchtrigger

NOTE: The tool is automatically turned off after the

tool is left one minute without any operations.

Speed adjusting

Youcanadjustthetoolspeedbytappingthemain

power button.

Eachtimeyoutapthemainpowerbutton,thelevelof

speed will change.

►Fig.10: 1. Main power button

Indicator Mode Rotation speed

Auto 4,000 - 6,000 min

-1

High 6,000 min

-1

Medium 5,000 min

-1

Low 4,000 min

-1

Reverse button for debris removal

WARNING: Switch off the tool and remove

the battery cartridge before you remove entan-

gled weeds or debris which the reverse rotation

function can not remove. Failure to switch off and

remove the battery cartridge may result in serious

personalinjuryfromaccidentalstart-up.

This tool has a reverse button to change the direction of

rotation. It is only for removing weeds and debris entan-

gled in the tool.

To reverse the rotation, tap the reverse button and pull

the trigger when the tool’s head is stopped. The power

lamp starts blinking, and the tool's head rotates in

reverse direction when you pull the switch trigger.

To return to regular rotation, release the trigger and wait

until the tool's head stops.

►Fig.11: 1. Reverse button

NOTE:

During the reverse rotation, the tool operates only

for a short period of time and then automatically stops.

NOTE: Once the tool is stopped, the rotation returns

to regular direction when you start the tool again.

NOTE: If you tap the reverse button while the tool's

head is still rotating, the tool comes to stop and to be

ready for reverse rotation.

Nylon cutting head

Optional accessory

NOTICE: The bump feed will not operate properly if

the head is not rotating.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DUR188U Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info