Bedienungsanleitung Makita DVC265 (Seite 17 von 34) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691489

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

17 ENGLISH

Cancelling tool registration for the

cleaner

Perform the following procedure when cancelling the

tool registration for the cleaner.

1. Install the wireless units to the cleaner and the

tool, respectively.

2. Install the batteries to the cleaner and the tool.

3. Set the stand-by switch on the cleaner to " I (ON)".

►Fig.40: 1. Stand-by switch

4. Press the wireless activation button on the cleaner

for 6 seconds. The wireless activation lamp blinks in

green and then become red. After that, press the wire-

less activation button on the tool in the same way.

►Fig.41: 1. Wireless activation button 2. Wireless

activation lamp

If the cancellation is performed successfully, the wire-

less activation lamps will light up in red for 2 seconds

and start blinking in blue.

NOTE:Thewirelessactivationlampsnishblinkingin

red after 20 seconds elapsed. Press the wireless acti-

vation button on the tool while the wireless activation

lamp on the cleaner is blinking. If the wireless acti-

vation lamp does not blink in red, push the wireless

activationbuttonbrieyandholditdownagain.

Erasing all tool registrations

You can erase all tool registrations from the cleaner as

follows.

►Fig.42: 1. Stand-by switch 2. Wireless activation

button 3. Wireless activation lamp

1. Install the wireless unit to the cleaner.

2. Install the batteries to the cleaner.

3. Set the stand-by switch to " I (ON)".

4. Hold down the wireless activation button for about

6 seconds until the wireless activation lamp blinks in red

(about twice per one second).

5. When the wireless activation lamp starts blinking

inred,releaseyourngerfromthewirelessactivation

button. Thereafter, hold down the wireless activation

button again for about 6 seconds.

6. When the wireless activation lamp starts blinking

fast (about 5 times per one second) in red, release your

ngerfromthewirelessactivationbutton.Whenthe

wireless activation lamp lights up in red and later lights

off, all tool registrations are erased.

NOTE: If the wireless activation lamp does not blink

inred,pressthewirelessactivationbuttonbrieyand

try again.

Description of the wireless activation lamp status

►Fig.43: 1. Wireless activation button 2. Wireless

activation lamp

The wireless activation lamp shows the status of the wireless activation function. Refer to the below table for the

meaning of the lamp status.

Status Wireless activation lamp Description

Color

Blinking

Duration

(approximate)

Standby Blue

Cleaner: con-

tinuing

Tool: 2 hours

Waiting for the tool registration or the wireless activation function

is available.

The lamp on the cleaner blinks when the stand-by switch is set in

" I (ON)". The lamp on the tool blinks when the wireless activation

button is pushed. The lamp on the tool will automatically turn off

when no operation is performed for 2 hours.

When the tool is

running.

The wireless activation of the cleaner is available and the tool is

running.

Tool

registration

Green

20 seconds Ready for the tool registration. Searching the tool to be registered.

2 seconds Thetoolregistrationhasbeennished.Thewirelessactivation

lamp will start blinking in blue.

Cancelling/

erasing

tool

registration

Red

(slow: 2 times/sec.)

20 seconds Ready for the cancellation of the tool registration. Searching the

tool to be cancelled.

(fast: 5 times/sec.)

When the

wireless acti-

vation button is

pressed down.

Ready to erase all tool registrations.

2 seconds The tool registration has been cancelled/erased. The wireless

activation lamp will start blinking in blue.

Others Red

3 seconds The power is supplied to the wireless unit and the wireless activa-

tion function is starting up.

Off - - The stand-by switch is not set to " I (ON)".

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DVC265 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info