Bedienungsanleitung Makita DVC861L (Seite 12 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

657968

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

ASSEMBLY

CAUTION:

• Always be sure that the cleaner is switched off,

unplugged, and the battery cartridge is removed before

carrying out any work on the cleaner.

• Always wear dust mask during assembly or

maintenance.

Installing the powder filter and prefilter

(for dry dust) (optional accessory for

cloth filter model) (Fig. 13 & 14)

CAUTION:

• Never pick up water or other liquids or wet dusts when

using the powder filter. Picking up such things may

cause the powder filter breakage.

To use powder filter, remove the float cage and float by

removing the bolts.

Place the prefilter in the tank.

Next, mount the damper on the powder filter and then

place them in the prefilter.

When installing powder filter and prefilter, align the

mounting position marking on each of them with that one

at the top of the tank.

Finally, mount the tank cover and lock it.

NOTE:

• Before using the powder filter, make sure that prefilter

and damper are always used together. It is not allowed

to install powder filter solely.

Installing the water filter (for cloth filter

model) (optional accessory)

CAUTION:

• Never pick up water or wet dust without the float and

the cloth filter or the water filter.

• For picking up wet dust, make sure that the float cage

and the float are installed on the cleaner.

• When installing the water filter on the tank, set it tight at

the opening of the tank so that the hook of the water

filter engages the tank opening firmly and there is no

space between the water filter and the tank.

NOTICE:

• It is recommended using water filter when picking up

large amount of water repeatedly. Otherwise vacuum

ability may be reduced in case of cloth filter.

To pick up water or wet dust only, the water filter is more

suitable than the cloth filter.

When installing the water filter, align its mounting position

mark with the one on the tank. (Fig. 15)

Installing the paper pack (optional

accessory)

WARNING:

• When using the paper pack, also use the cloth filter or

prefilter together that is preinstalled on the tool. Failure

to use the cloth filter/prefilter together may cause

unusual noise and heat, resulting in a fire.

CAUTION:

(For the cloth filter model)

• Never pick up water or other liquids or wet dusts when

using the paper pack. Picking up such things may

cause the paper pack breakage.

• Before using the paper pack, make sure that powder

filter (optional accessory), damper (optional accessory)

and prefilter are always used together.

(For the powder filter model)

• Before using the paper pack, make sure that powder

filter, damper and prefilter are always used together.

1. Remove the rubber holder. (Fig. 16)

2. Extend the paper pack.

3. Align the paper pack opening with the dust suction

opening of the cleaner.

4. Insert the cardboard of the paper pack onto the holder

so that it is positioned at the end beyond the detent

protrusion. (Fig. 17)

Installing the polyethylene bag

Cleaner can also be used without polyethylene bag.

However, using polyethylene bag is easier to empty the

tank without letting your hands dirty.

Spread the polyethylene bag in the tank. Insert it between

the holder plate and the tank, and pull it to the hose inlet.

Spread the bag around the top of the tank so that the

prefilter edge can catch and hold the bag securely.

(Fig. 18)

NOTE:

• A polyethylene bag available on the market can be

used. 0.04 mm or thicker one is recommended.

• Too much dust will tear the bag easily, so do not collect

the dust more than the half of the bag capacity.

Emptying the polyethylene bag

WARNING:

• Always make sure that the cleaner is switched off and

unplugged before emptying the polyethylene bag.

Failure to do so may cause an electric shock and

serious personal injury.

CAUTION:

• Do not apply a great impact on the float cage and tank.

Applying a great impact may cause deformation and

damage to the parts.

• Empty the tank at least once a day although this

depends on picked-up dust volume in the tank. Or, the

suction force will weaken and the motor may be

broken.

• Do not grab the hook when emptying the tank.

Grabbing the hook may cause the hook to break.

Unhook and lift up the tank cover.

Shake off the dust from the cloth filter/powder filter and

then take the polyethylene bag out of the tank. (Fig. 19)

NOTE:

• Take the polyethylene bag carefully out of the tank so

that the polyethylene bag cannot be caught and torn by

the protrusion inside the tank when emptying it.

• Empty the polyethylene bag before it becomes full. Too

much dust in the tank may cause the polyethylene bag

to be torn.

Installing the tool box

1. Release the lock of the battery cover, and open the

battery cover.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DVC861L Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info