Bedienungsanleitung Makita DVC863L (Seite 10 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691506

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

10 ENGLISH

Overload protection

When the tool is operated in a manner that causes it to

draw an abnormally high current, the tool automatically

stops without any indication. In this situation, turn the

tool off and stop the application that caused the tool to

become overloaded. Then turn the tool on to restart.

Overheat protection

On Blinking

When the tool is overheated, the tool stops automatically,

and the battery indicator blink about 60 seconds. In this situ-

ation, let the tool cool down before turning the tool on again.

Overdischarge protection

When the battery capacity becomes low, the tool stops

automatically. If the product does not operate even

when the switches are operated, remove the batteries

from the tool and charge the batteries.

Switch action

► Fig.6: 1. Stand-by switch 2. Power button 3. Suction

force adjusting knob

To start the cleaner:

1. Set the stand-by switch to the "I" side. The cleaner

gets into stand-by state.

2. Press the power button.

To make the cleaner get into stand-by mode, press the

power button again.

To turn off the cleaner, set the stand-by switch to the "O" side.

The suction power can be adjusted according to your work need.

Suction power can be increased by turning the suc-

tion force adjusting knob from the symbol to

the symbol.

NOTICE: Always set the stand-by switch to the "O"

side when not using the cleaner for long time. The

cleaner consumes power during stand-by state.

Auto-suction stop during wet

suction operation

Only for the cloth lter model

WARNING: Do not use for a long time while

the oat is at work. Using the cleaner with its oat at

work for a long time can cause overheat, resulting in

the cleaner deformation.

WARNING: Do not pick up foam or soapy

liquid. Picking up foam or soapy liquid can cause

foam to come out of air exit before the oat works.

Continuing to using in this condition may cause an

electric shock and breakage of the cleaner.

Auto-suction stop works only when using with the oat

and oat cage.

The cleaner has a oat mechanism that prevents water from

immersing into the motor when picking up more than a certain

amount of water. When the tank is full and the cleaner no lon-

ger picks up water, switch off the cleaner and empty the tank.

Locking or unlocking the caster

► Fig.7: 1. Caster 2. Stopper lever 3. FREE position

4. LOCK position

Locking the caster is convenient when storing the

cleaner, stopping the work on the way and keeping the

cleaner still.

To operate the stopper, move it by hand.

To lock the caster with a stopper, lower the stopper

lever and the caster no longer will rotate. To release the

caster from the locked position, raise the stopper lever.

NOTE: When moving the cleaner, make sure that

the caster is unlocked. Moving the cleaner with the

caster in the locked position may cause damage to

the caster.

Carriage handle

When carrying the cleaner, carry it by holding the han-

dle on the head. The handle is retractable at the head

when not in use.

► Fig.8

PARTS DESCRIPTION

Model DVC862L

(Cloth lter (for dry and wet dust) model)

► Fig.9: 1. Tank cover 2. Float 3. Float cage 4. Cloth

lter 5. Tank

Model DVC863L

(Powder lter (for dry dust) model)

► Fig.10: 1. Tank cover 2. Powder lter 3. Damper

4. Prelter 5. Tank

ASSEMBLY

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before carrying out any work on the tool.

CAUTION: Always wear dust mask during

assembly or maintenance.

Installing the powder lter and

prelter (for dry dust)

Optional accessory for cloth lter model

CAUTION: Never pick up water or other liq-

uids or wet dusts when using the powder lter.

Picking up such things may cause the powder lter

breakage.

To use powder lter:

Remove the oat cage and oat by removing the bolts.

► Fig.11: 1. Float 2. Float cage

2. Place the prelter in the tank with aligning the

mounting position markings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DVC863L Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info