Bedienungsanleitung Makita DVC863L (Seite 11 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691506

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

11 ENGLISH

3. Mount the damper on the powder lter and then

place them in the prelter with aligning the mounting

position markings.

4. Finally, mount the tank cover and lock it.

► Fig.12: 1. Tank cover 2. Powder lter 3. Damper

4. Prelter 5. Tank 6. Mounting position

marking

NOTICE: Before using the powder lter, make

sure that prelter and damper are always used

together. It is not allowed to install powder lter

solely.

Installing the water lter

Only for cloth lter model (optional accessory)

CAUTION: Never pick up water or wet dust

without the oat and the cloth lter or the water

lter.

CAUTION: For picking up wet dust, make

sure that the oat cage and the oat are installed

on the cleaner.

CAUTION: When installing the water lter on

the tank, set it tight at the opening of the tank so

that the hook of the water lter engages the tank

opening rmly and there is no space between the

water lter and the tank.

To pick up water or wet dust only, the water lter is more

suitable than the cloth lter.

When installing the water lter, align its mounting posi-

tion mark with the one on the tank.

► Fig.13: 1. Water lter 2. Tank 3. Mounting position

marking

NOTE: It is recommended using water lter when

picking up large amount of water repeatedly.

Otherwise vacuum ability may be reduced in case of

cloth lter.

Installing the paper pack

Optional accessory

WARNING: When using the paper pack, also

use the cloth lter or prelter together that is

preinstalled on the tool. Failure to use the cloth lter

/ prelter together may cause unusual noise and heat,

resulting in a re.

CAUTION: (For the cloth lter model)

• Never pick up water or other liquids or wet

dusts when using the paper pack. Picking

up such things may cause the paper pack

breakage.

• Before using the paper pack, make sure that

powder lter (optional accessory), damper

(optional accessory) and prelter are always

used together.

CAUTION: (For the powder lter model)

• Before using the paper pack, make sure

that powder lter, damper and prelter are

always used together.

1. Remove the rubber holder.

► Fig.14: 1. Rubber holder

2. Extend the paper pack.

3. Align the paper pack opening with the dust suction

opening of the cleaner.

4. Insert the cardboard of the paper pack onto the

holder so that it is positioned at the end beyond the

detent protrusion.

► Fig.15: 1. Paper pack 2. Holder

Installing the polyethylene bag

Cleaner can also be used without polyethylene bag.

However, using polyethylene bag is easier to empty the

tank without letting your hands dirty.

Spread the polyethylene bag in the tank. Insert it

between the holder plate and the tank, and pull it to the

hose inlet.

► Fig.16: 1. Holder plate 2. Polyethylene bag

Spread the bag around the top of the tank so that the

cloth lter / prelter edge can catch and hold the bag

securely.

► Fig.17: 1. Cloth lter / prelter

NOTE: A polyethylene bag available on the

market can be used. 0.04 mm or thicker one is

recommended.

NOTE: Too much dust will tear the bag easily, so

do not collect the dust more than the half of the bag

capacity.

Emptying the polyethylene bag

WARNING: Always make sure that the

cleaner is switched off and the battery cartridge is

removed before emptying the polyethylene bag.

Failure to do so may cause an electric shock and

serious personal injury.

CAUTION: Do not apply a great impact on the

oat cage and tank. Applying a great impact may

cause deformation and damage to the parts.

CAUTION: Empty the tank at least once a day

although this depends on picked-up dust volume

in the tank. Or, the suction force will weaken and the

motor may be broken.

CAUTION: Do not grab the hook when empty-

ing the tank. Grabbing the hook may cause the hook

to break.

Unhook and lift up the tank cover.

Shake off the dust from the cloth lter / prelter and then

take the polyethylene bag out of the tank.

► Fig.18

NOTE: Take the polyethylene bag carefully out of the

tank so that the polyethylene bag cannot be caught

and torn by the protrusion inside the tank when emp-

tying it.

NOTE: Empty the polyethylene bag before it

becomes full. Too much dust in the tank may cause

the polyethylene bag to be torn.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita DVC863L Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info