Bedienungsanleitung Makita EA5001P (Seite 4 von 80) (Englisch, Französisch)

690913

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Additional safety precautions

The following additional safety precautions must be ob-

served by all users of chain saws:

- A chain saw is intended for two-handed use. Do not

operate a chain saw with one hand! Serious injury to

the operator, helpers, bystanders may result from one-

handed operation.

- When a chain saw is being used, a re extinguisher

should be available.

- Follow the instructions in your operator’s manual for

starting the chain saw and control the chain saw with a

rm grip on both handles when it is in operation. Keep

handles dry, clean, and free of oil or fuel mixture.

- Do not operate a chain saw when you are fatigued.

Fatigue causes carelessness. Be more cautious before

rest periods and towards the end of your shift.

- Personal protective clothing required by your safety

organizations, government regulations, or your employer

should be used. At all times when using a chain saw,

snug-tting clothing, protective eyewear, safety footwear,

and hand, leg, head and hearing protection should be

worn.

Note: Personal protective clothing should meet the

requirements of applicable CSA and BNQ Standards.

- Use caution when handling fuel. Before fuelling, ser-

vicing, or transporting your chain saw, switch off the

engine. To help prevent re, restart your chain saw at

least 3 m (10 ft) from the fuelling area.

- Keep other persons or animals a safe distance away

from a running chain saw or the area where a tree is

being felled.

- Always keep proper footing and operate the chain saw

only when standing on a xed, secure, and level surface,

and a planned retreat path from the falling tree.

- Keep all parts of your body away from the saw chain

when the engine is running.

- Before you start the engine, make sure that the saw

chain is not contacting anything.

- Carry the chain saw by the front handle with the engine

stopped, the guide bar and saw chain to the rear, and

the mufer away from your body.

- When transporting, storing or not in use, always use the

appropriate guide bar cover. It must t and fully cover

the guide bar on the chain saw.

- Never operate a chain saw that is damaged or impro-

perly adjusted or that is not completely and securely

assembled. Be sure that the saw chain stops moving

when the power control system trigger is released. Never

adjust the guide bar or saw chain when the engine is

operating.

- Shut off the engine before setting the chain saw down.

- Use extreme caution when cutting small-size brush

and saplings because slender material may catch the

saw chain and be whipped toward you or pull you off

balance.

Safety precautions for chain saw operators

While operating the chain saw please observe the follo-

wing rules:

a) Contact of the guide bar nose with any object

should be avoided.

b) Tip contact may cause the guide bar to move

suddenly upward and backward, which may

cause serious or fatal injury.

WARNING!

Read and follow all safety precautions in the operator’s

manual. Failure to follow instructions could result in

serious injury. It is recommended to lend the chain

saw only to people who are experienced in working

with chain saws. Always hand over the Operator’s

and Safety Manual.

WARNING!

This chain saw is capable of severe kickback that

could result in serious injury to the operator. Do not

operate this chain saw unless you have extraordinary

cutting needs and experience in and special training

for dealing with kickback.

Chain saws with signicantly reduced kickback po-

tential are available.

Kickback safety precautions

WARNING!

Kickback may occur when the nose or tip of the guide

bar touches an object, or when the wood closes in and

pinches the saw chain in the cut. Tip contact in some

cases may cause a lightning-fast reverse reaction,

kicking the guide bar up and back toward the opera-

tor. Pinching the saw chain along the top of the guide

bar may push the guide bar rapidly back toward the

operator. Either of these reactions may cause you to

lose control of the saw, which could result in serious

personal injury. Do not rely exclusively upon the safety

devices built into your saw. As a chainsaw user, you

should take several steps to keep your cutting jobs

free from accident or injury.

a) With a basic understanding of kickback, you

can reduce or eliminate the element of surprise.

Sudden surprise contributes to accidents.

b) Keep a good rm grip on the saw with both

hands, the right hand on the rear handle and the

left hand on the front handle, when the engine is

running. Use a rm grip with thumbs and ngers

encircling the chain saw handles. A rm grip will

help reduce kickback and maintain control of the

saw. Don‘t let go.

c) Make sure that the area in which you are cutting

is free from obstructions. Do not let the nose

of the guide bar contact a log, branch, or any

other obstruction that could be hit while you are

operating the saw.

d) Cut at high engine speeds.

e) Do not overreach or cut above shoulder height.

f) Follow the manufacturer’s sharpening and main-

tenance instructions for the saw chain.

g) Only use replacement bars and chains specied

by the manufacturer or the equivalent.

Makita EA5001P Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita EA5001P

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info