Bedienungsanleitung Makita EA5001P (Seite 6 von 80) (Englisch, Französisch)

690913

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

General Safety Precautions

The use of any chain saw may be hazardous. At full throttle

chain speed can reach 45 mph (20 m/s). It is important

that you read; fully understand and observe the following

safety precautions and warnings. Read the Operator’s

Manual and the safety instructions periodically.

WARNING!

Reactive forces, including kickback, can be da n gerous.

Careless or improper use of any chain saw may cause

serious or fatal injury.

Have your MAKITA dealer show you how to operate

your chain saw. Observe all applicable local safety

regulations, standards and ordinances.

WARNING!

Prolonged use of chain saws exposing the operator

to vibrations may produce Whitenger disease (Ray-

naud’s phenomenon). This phenomenon reduces

the hand’s ability to feel and regulate temperature,

produces numbness and burning sensations and

may cause nerve and circulation damage and tissue

necrosis.

All MAKITA saws are therefore provided with an an-

tivibration system which is essential for those using

chain saws on a regular or sustained basis. Antivi-

bration systems do not guarantee that you will not

sustain Whitenger disesase, however, they reduce

this danger considerably. Nevertheless, continual and

regular users should observe their hands and ngers

and in case of any abnormal symptoms, seek medical

advice immediately.

The operator

Physical Condition

You must be in good physical condition and mental

health and not under the inuence of any substance

(drugs, alcohol), which might impair vision, dexterity

or judgment.

CUS

Discription of symbols used on chain

saws:

CSA Standards Z62.1-15

Class 1A Z62.3-11

ANSI Standard B175.1-2012

WARNING!

Minors should never be allowed to use a chain

saw.

Bystanders, especially children and animals should

not be allowed in the area where a chain saw is in

use (g. 1).

Never let the saw run unattended.

Store it in a locked place away from children. Empty

the fuel and oil tank (see storing the saw).

Do not lend your chain saw without this Operator’s

and Safety Manual. Be sure that anyone using your

saw understands the information given.

Proper use of a chain saw involves

1. the operator

2. the saw

3. the use of the saw.

Maximum Computed Kickback Angle CKAwb* with using

the chain brake when using the recommended bar and

chain combinations. In this example the CKA is 45°.

Always use two hands when op-

erating the chain saw!

* The Computed Kickback Angle is a calculated value from

energies measured on a test bench.It is not the angle of

the guide bar moved upward in case of a KICKBACK.

Reduced Kickback Bar and

Chain combination that has been

evaluated with the power head

to achieve kickback protection

(according to ANSI and CSA

standards).

XXX.YYY.ZZZ

Contact of the guide bar tip with

any object should be avoided!

Tip contact may cause the guide

bar to move suddenly upward

and backward, which may cause

serious injury!

Maximum Computed Kickback Angle

CKAwob* without using the chain brake

when using the recommended bar and chain

combinations. In this example the CKA is 92°.

max. 92

CKAwob,

CKAwb

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita EA5001P Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita EA5001P

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info