6
Part description (Fig. 1)
The numbers below refer to the gure
1. Shaft
2. Gear Case
3. Oil cap
4. Oil tank
5. Bar holder
6. Guide bar
7. Saw chain
8. Guide bar cover
Safety precautions
W
in this booklet and the instruction manual of the power unit.
Failure to follow the warnings and instructions may result in
electric shock, re and/or serious injury
Save all warnings and instructions for future reference.
The term “pole saw” and “equipment” in the warnings and
precautions refer to the combination of the attachment and the
power unit.
The term “motor” in the warnings and precautions refers to the
engine or electric motor of the power unit.
Intended use
This attachment is designed for only the purpose of pruning •
branches and limbs less than 15 cm in diameter in conjunction
with an approved power unit. Never use the attachment for the
other purpose.
General precautions
Before starting the pole saw•
manual of the power unit to become familiar with the handling of
the pole saw
Do not lend the attachment to a person with insufcient
experience or knowledge regarding handling of pole saws.
When lending the attachment, always attach this instruction •
manual.
Do not allow children or young persons under 18 years old to use •
the pole saw
Handle the pole saw with the utmost care and attention.•
Never use the pole saw after consuming alcohol or drugs, or if •
feeling tired or ill.
Never attempt to modify the attachment.•
National regulations may restrict of the use of the equipment.•
Follow the regulations about handling of pole saws and chain
saws in your country
Personal protective equipment
Wear safety helmet, protective goggles and protective gloves to •
protect yourself from ying debris or falling objects. (Fig. 2)
Wear ear protection such as ear muf•
Wear proper clothing and shoes for safe operation, such as •
a work overall and sturdy
clothing or jewelry
caught in moving parts.
When handling the saw chain or adjusting the chain tension, wear •
protective gloves. Saw chain can cut bare hands severely
Work area safety
• Danger: Keep the pole saw at least 15 m away from electric
lines and communication cables (including any branches
contacting them). T
the pole saw can result in death or serious injury
lines and electrical fences around the work area before starting
operation.
Operate the pole saw under good visibility and daylight conditions •
only
Start and operate the engine only outdoors in a well ventilated •
area. Operation in a conned or poorly ventilated area can result
in death due to suffocation or carbon monoxide poisoning.
During operation, never stand on an unstable or slippery surface •
or a steep slope. During the cold season, beware of ice and snow
and always ensure secure footing.
During operation, keep bystanders or animals at least 15 m •
away from the pole saw
approaches.
Before operation, examine the work area for wire fences, walls, •
or other solid objects. They can damage the saw chain.
• W Use of this product can create dust containing
chemicals which may cause respiratory or other illnesses.
Some examples of these chemicals are compounds found in
pesticides, insecticides, fertilizers and herbicides.
Y
you do this type of work. T
chemicals: work in a well ventilated area, and work with approved
safety equipment, such as those dust masks that are specially
designed to lter out microscopic particles.
Putting into operation
Before assembling or adjusting the equipment, switch off the •
motor and remove the spark plug cap or the battery cartridge.
Before handling the saw chain or adjusting the chain tension, •
wear protective gloves.
Before starting the motor•
loose screws/nuts or improper assembly
chain. If the saw chain is bent or damaged, replace it. Check all
control levers and switches for easy action. Clean and dry the
handles.
Never attempt to start the motor if the equipment is damaged or •
not fully assembled. Otherwise serious injury may result.
Adjust the shoulder harness and hand grip to suit the operator•
body size.
Adjust the chain tension properly
Starting motor
Wear the personal protective equipments before starting the motor•
Start the engine at least 3 meters (10 feet) away from the fueling •
spot.
Before starting the motor•
animal in the work area.
When starting the engine or inserting a battery cartridge, keep •
the saw chain and guide bar clear of your body and other object,
including the ground. The saw chain may move when starting
and may cause serious injury or damage to the saw chain and/or
property
Place the equipment on rm ground. Maintain good balance and
secure footing.
When pulling the starter knob, hold the power unit rmly against
the ground by your left hand. Never step on the drive shaft of the
power unit. (Fig. 3)
Follow the instruction manual of the power unit for starting the •
motor
Check that there is sufcient difference between idling and
engagement speed to ensure that the attachment is at a standstill
while the engine is idling (if necessary reduce idling speed).
If the saw chain moves at idle, stop the engine and adjust the idle •
speed down.
Operation
In the event of an emergency•
If you feel any unusual condition (e.g. noise, vibration) during •
operation, switch off the motor
the cause is recognized and solved.
The saw chain continues to move for a short period after •
releasing the throttle trigger or switch off the motor
contact the saw chain.
With the engine running only at idle, attach the shoulder harness.•
During operation, use the shoulder harness. Keep the equipment •
on your right side rmly(Fig. 4)
Hold the front handle with the left hand and the rear grip with the •
right hand, no matter you are right-hander or left-hander
your ngers and thumbs around the handles.
Never attempt to operate the equipment with one hand. Loss of •
control may result in serious or fatal injury
injury
Do not overreach. Keep proper footing and balance at all times. •
W
ditches to avoid stumbling. Clear fallen branches and other
objects away
Never work on a ladder or tree to avoid loss of control.•
