Bedienungsanleitung Makita GA042G (Seite 12 von 188) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

793625

Zoom out

Zoom in

Vorherige Seite

1/188

Nächste Seite

12 ENGLISH

5. The rated speed of the accessory must be at

least equal to the maximum speed marked on

the power tool. Accessories running faster than



6. The outside diameter and the thickness of your

accessory must be within the capacity rating

of your power tool.



7. The dimensions of the accessory mounting

-

ware of the power tool. Accessories that do not

match the mounting hardware of the power tool





8. Do not use a damaged accessory. Before each

use inspect the accessory such as abrasive

wheels for chips and cracks, backing pad for

cracks, tear or excess wear, wire brush for

loose or cracked wires. If power tool or acces-

sory is dropped, inspect for damage or install

an undamaged accessory. After inspecting and

installing an accessory, position yourself and

bystanders away from the plane of the rotating

accessory and run the power tool at maximum

no-load speed for one minute. Damaged acces-



time.

9. Wear personal protective equipment.

Depending on application, use face shield,

safety goggles or safety glasses. As appro-

priate, wear dust mask, hearing protectors,

gloves and workshop apron capable of stop-

ping small abrasive or workpiece fragments.





The dust mask or respirator must be capable







10. Keep bystanders a safe distance away from

work area. Anyone entering the work area

must wear personal protective equipment.





area of operation.

11. Hold the power tool by insulated gripping

surfaces only, when performing an operation

where the cutting tool may contact hidden

wiring. Contact with a "live" wire will also make

exposed metal parts of the power tool "live" and

could give the operator an electric shock.

12. Never lay the power tool down until the acces-

sory has come to a complete stop. The spinning





13. Do not run the power tool while carrying it at

your side. Accidental contact with the spinning





14. Regularly clean the power tool’s air vents. The

motor’s fan will draw the dust inside the housing

and excessive accumulation of powdered metal



15. 

materials. Sparks could ignite these materials.

16. Do not use accessories that require liquid

coolants.



Kickback and related warnings:

Kickback is a sudden reaction to a pinched or snagged

-



-

trolled power tool to be forced in the direction opposite



For example, if an abrasive wheel is snagged or



entering into the pinch point can dig into the surface of

the material causing the wheel to climb out or kick out.



operator, depending on direction of the wheel’s move-



break under these conditions.

Kickback is the result of power tool misuse and/or

incorrect operating procedures or conditions and can be



1. 

power tool and position your body and arms

to allow you to resist kickback forces. Always

use auxiliary handle, if provided, for maxi-

mum control over kickback or torque reaction

during start-up.

reactions or kickback forces, if proper precautions

are taken.

2. Never place your hand near the rotating acces-

sory.

3. Do not position your body in the area where

power tool will move if kickback occurs.

Kickback will propel the tool in direction opposite

to the wheel’s movement at the point of snagging.

4. Use special care when working corners, sharp

edges, etc. Avoid bouncing and snagging the

accessory. Corners, sharp edges or bouncing



and cause loss of control or kickback.

5. Do not attach a saw chain woodcarving blade,

segmented diamond wheel with a peripheral

gap greater than 10 mm or toothed saw blade.



control.

-

󰀨

1. 



designed for the selected wheel. Wheels for

which the power tool was not designed cannot be



2. The grinding surface of centre depressed

wheels must be mounted below the plane of

the guard lip.

projects through the plane of the guard lip cannot



3. The guard must be securely attached to the

power tool and positioned for maximum safety,

so the least amount of wheel is exposed

towards the operator. The guard helps to protect

the operator from broken wheel fragments, acci-

dental contact with wheel and sparks that could

ignite clothing.

Makita GA042G Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info