Bedienungsanleitung Makita GA042G (Seite 13 von 188) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

793625

Zoom out

Zoom in

Vorherige Seite

1/188

Nächste Seite

13 ENGLISH

-

tions. For example: do not grind with the side of

󰀨󰀨

for peripheral grinding, side forces applied to these



5. 

of correct size and shape for your selected

wheel.



󰀨󰀨



6. Do not use worn down wheels from larger

power tools. A wheel intended for larger power

tool is not suitable for the higher speed of a



7. When using dual purpose wheels always use

the correct guard for the application being

performed.

not provide the desired level of guarding, which



󰀨

operations:

1. 󰀨-

sive pressure. Do not attempt to make an

excessive depth of cut. Overstressing the wheel



or binding of the wheel in the cut and the possibil-



2. Do not position your body in line with and

behind the rotating wheel. When the wheel, at



-



3. When the wheel is binding or when interrupt-

󰀨

tool and hold it motionless until the wheel

comes to a complete stop. Never attempt to

󰀨

the wheel is in motion otherwise kickback may

occur. Investigate and take corrective action to

eliminate the cause of wheel binding.

4. Do not restart the cutting operation in the

workpiece. Let the wheel reach full speed and

carefully re-enter the cut.

walk up or kickback if the power tool is restarted in

the workpiece.

5. Support panels or any oversized workpiece to

minimize the risk of wheel pinching and kick-

back. Large workpieces tend to sag under their

own weight. Supports must be placed under the

workpiece near the line of cut and near the edge

of the workpiece on both sides of the wheel.

6. Use extra caution when making a “pocket cut”

into existing walls or other blind areas. The

-

trical wiring or objects that can cause kickback.

7. Do not attempt to do curved cutting.

Overstressing the wheel increases the loading and







8. Before using a segmented diamond wheel,

make sure that the diamond wheel has the

peripheral gap between segments of 10 mm or

less, only with a negative rake angle.



1. Use proper sized sanding disc paper. Follow

manufacturers recommendations, when

selecting sanding paper. Larger sanding paper

-



tearing of the disc or kickback.



operations:

1. Be aware that wire bristles are thrown by the

brush even during ordinary operation. Do not

overstress the wires by applying excessive

load to the brush.

penetrate light clothing and/or skin.

2. 

brushing, do not allow any interference of the

wire wheel or brush with the guard. Wire wheel



and centrifugal forces.

Additional Safety Warnings:

When using depressed centre grinding wheels,



2. NEVER USE Stone Cup type wheels with this

grinder. This grinder is not designed for these





3. Be careful not to damage the X-LOCK holder.

Damage to the parts could result in wheel

breakage.

4. Make sure the wheel is not contacting the

workpiece before the switch is turned on.

5. Before using the tool on an actual workpiece,

let it run for a while. Watch for vibration or

wobbling that could indicate poor installation

or a poorly balanced wheel.

6. -

form the grinding.

7. Do not leave the tool running. Operate the tool

only when hand-held.

8. Do not touch the workpiece immediately after

operation; it may be extremely hot and could

burn your skin.

9. Do not touch accessories immediately after

operation; it may be extremely hot and could

burn your skin.

10. Observe the instructions of the manufacturer

for correct mounting and use of wheels.

Handle and store wheels with care.

11. Do not use separate reducing bushings or

adaptors to adapt large hole abrasive wheels.

12. Check that the workpiece is properly

supported.

13. Pay attention that the wheel continues to

󰀨

14. If working place is extremely hot and humid,

or badly polluted by conductive dust, use a

short-circuit breaker (30 mA) to assure opera-

tor safety.

15. Do not use the tool on any materials contain-

ing asbestos.

16. 󰀨

the dust collecting wheel guard if required by

domestic regulation.

Makita GA042G Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info