Bedienungsanleitung Makita GF600 (Seite 7 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

599698

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Save all warnings and

instructions for future reference.

Cordless nailer/stapler safety

warnings

ENB111-4

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in serious injury, electric shock

and/or fire.

Save all warnings and instructions for

future reference.

For personal safety and proper operation and

maintenance of the tool, read this instruction manual

before using the tool.

General safety

• Do not permit those uninstructed to use the tool.

• No horseplay. Respect the tool as a working

implement.

• Do not operate when under the influence of alcohol,

drugs or the like.

• Never alter the tool.

Personal protective equipments

• Always wear safety glasses to protect your eyes from

dust or fastener injury.

WARNING: It is an employer’s responsibility to

enforce the use of safety eye protection equipment by

the tool operators and by other persons in the

immediate working area.

For Australia and New Zealand only

Always wear safety glasses and face shield to protect

your eyes from dust or fastener injury. The safety

glasses and the face shield should conform with the

requirements of AS/NZS 1336. (Fig. 1)

• Wear hearing protection to protect your ears against

exhaust noise and head protection. Also wear light but

not loose clothing. Sleeves should be buttoned or

rolled up. No necktie should be worn.

Work area safety

• Never use the tool in enclosed or poorly ventilated

spaces. Otherwise carbon monoxide may cause

dizziness, nausea or unconsciousness.

• Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

• Do not operate the tool in explosive atmospheres, such

as in the presence of flammable liquids, gases or dust.

Operating the tool can create sparks which may ignite

the dust or fumes.

• Keep children and bystanders away while operating the

tool. Distractions can cause you to lose control.

• Illuminate the work area sufficiently.

• There may be local regulations concerning noise which

must be complied with by keeping noise levels within

prescribed limits. In certain cases, shutters should be

used to contain noise.

Safety devices

• Make sure all safety systems are in working order

before operation. The tool must not operate if only the

trigger is pulled or if only the contact arm is pressed

against the wood. It must work only when both actions

are performed. Test for possible faulty operation with

fasteners unloaded and the pusher in fully pulled

position.

• Do not play with the contact element: it prevents

accidental discharge, so it must be kept on and not

removed. Securing the trigger in the ON position is also

very dangerous. Never attempt to fasten the trigger. Do

not operate a tool if any portion of the tool operating

controls is inoperable, disconnected, altered, or not

working properly.

• Do not attempt to keep the contact element depressed

with tape or wire. Death or serious injury may occur.

• Always check contact element as instructed in this

manual. fasteners may be driven accidentally if the

safety mechanism is not working correctly.

Loading fasteners

• Do not load the tool with fasteners when any one of the

operating controls is activated.

• Use only fasteners specified in this manual. The use of

any other fasteners may cause malfunction of the tool.

Power source

• Use the tool only with the Makita genuine fuel cell.

• Do not touch liquid gas sprayed out of the fuel cell.

Contact with it may cause injury.

• Risk of fire and explosion. When handling the fuel cell

for the purpose of storage, transportation, inserting into

and taking out of the tool and disposal:

– do not expose to sunlight and to temperatures

exceeding 50

°C (122°F);

– do not smoke;

– avoid sparks and open flame.

• Always remove the battery cartridge and remove all of

the fasteners:

– when unattended;

– before performing any maintenance or repair;

– before cleaning a jam;

– before moving the tool to a new location.

Operational safety

• Always check the tool for its overall condition and loose

screws before operation. Tighten as required.

• Handle the tool carefully, as there is high pressure

inside the tool that can be dangerous if a crack is

caused by rough handling (dropping or striking). Do not

attempt to carve or engrave on the tool.

• Stop the operation immediately if you notice something

wrong or out of the ordinary with the tool. An improperly

functioning tool must not be used.

• Do not point the ejection port at anyone in the vicinity.

Keep hands and feet away from the ejection port area.

• Always assume that the tool contains fasteners.

• Never point the tool toward yourself or anyone whether

it contains fasteners or not.

• Do not rush the job or force the tool. Handle the tool

carefully.

• Do not activate the tool unless the tool is placed firmly

against the workpiece.

• Never hold or carry the tool with a finger on the trigger

or hand it to someone in this condition. Accidental firing

can cause serious injury.

• Never use fastener driving tools marked with the

symbol “Do not use on scaffoldings, ladders” for

specific application for example:

Makita GF600 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info