Bedienungsanleitung Makita GF600 (Seite 10 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

599698

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Dry fire prevention automatically functions when the rest

of nails get to the last 9-11 pieces.

Jammed nailer

WARNING:

• Always be sure to remove the fuel cell and the battery

cartridge before clearing a jam.

CAUTION:

• Do not use deformed nails or nail strip. Failure to do so

causes poor nail feeding.

Follow the removing nail procedure and remove the nails

in the magazine. (Fig. 24)

Open the latch and release the door, then remove the

jammed nail.

MAINTENANCE

CAUTION:

• Always remove the fuel cell, the battery cartridge and

nails before attempting to perform inspection or

maintenance.

• Never use gasoline, benzine, thinner, alcohol or the

like. Discoloration, deformation or cracks may result.

Maintenance after daily work

At the end of daily work, conduct an end-of-workday

routine.

These simple steps are based on maintaining the safety

and performance of the tool.

Before leaving the work site:

• Remove the battery cartridge and store in a tool-

carrying case. Always use the tool-carrying case for

transporting and storing the tool.

• Dispose of all empty cells where they will not be found

by children, crushed, punctured or burned.

When you get home:

• Place the battery cartridge in its charger if it needs

charging as indicated by the red indication lamp.

• Wipe the tool with a clean, soft cloth.

• Check the filter and clean if it is dusty.

Cleaning the air filter (Fig. 25 & 26)

Press slightly up the filter cover and remove it. And then

simply lift out the filter.

Tap the filter lightly to remove any dust. Soap and water

restores the filter to an almost new condition

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be

performed by Makita Authorized Service Centers, always

using Makita replacement parts.

Thoroughly cleaning

If dry fires occur frequently, which means the tool is

needed to be cleansed thoroughly.

See the accompanying cleaning guide for detail, and

perform the cleaning.

If you have any questions regarding to cleaning, please

ask your local Makita Service Center.

OPTIONAL ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

• Nails

• Safety goggles

• Fuel cell

• Cleaning kit

• Makita genuine battery and charger

NOTE:

• Some items in the list may be included in the tool

package as standard accessories. They may differ

from country to country.

Noise

ENG905-1

The typical A-weighted noise level determined according

to EN792:

Sound pressure level (L

): 93 dB (A)

Sound power level (L

): 106 dB (A)

Uncertainty (K): 3 dB (A)

Wear ear protection.

Vibration

ENG904-2

The vibration total value determined according to EN792:

Vibration emission (a

): 3.5 m/s

Uncertainty (K): 1.5 m/s

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test method

and may be used for comparing one tool with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the power

tool can differ from the declared emission value

depending on the ways in which the tool is used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of exposure in

the actual conditions of use (taking account of all parts

of the operating cycle such as the times when the tool

is switched off and when it is running idle in addition to

the trigger time).

For European countries only

ENH003-14

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Cordless Brad Nailer

Model No./Type: GF600

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN792, EN60745

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita GF600 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info