Bedienungsanleitung Makita LC 1230 (Seite 9 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch)

448572

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENB076-1

ADDITIONAL SAFETY RULES FOR TOOL

1. Always use safety glasses, dust mask and ear

protector.

2. Use only Makita genuine carbide-tipped saw

blade 305 mm in diameter for metal cutting.

Never use abrasive cut-off wheel or other type of

saw blades.

3. Check the blade carefully for cracks or damage

before operation. Replace cracked or damaged

blade immediately.

4. Never secure the safety cover (safety guard).

Always be sure that the safety cover moves

smoothly before operation. Any irregular opera-

tion of the safety cover should be corrected

immediately. Do not use the saw without guards

in position.

5. Be sure shaft lock is released before the switch

is turned on.

6. Before using the tool on an actual workpiece, let

it run for a while. Watch for vibration or wobbling

that could indicate poor installation or a poorly

balanced blade.

7. Keep your hands and body away from rotating

blade.

8. Always secure the workpiece with the vise.

9. Make sure the blade is not contacting the work-

piece before the switch is turned on.

10. Watch out for flying sparks when operating.

They can cause injury or ignite combustible

materials.

11. Do not touch the blade, workpiece or cutting

chips immediately after operation; they may be

extremely hot and could burn your skin.

12. If the blade stops during operation, makes an

odd noise or begins to vibrate, switch off the tool

immediately. Then check the tool and blade.

SAVE THESE INSTRUCTIONS.

INSTALLATION

Positioning the tool

When the tool is shipped from the factory, the handle is

locked in the lowered position. Release the handle from

the lowered position by lowering it slightly and removing

the chain from the hook on the handle. (Fig. 1)

Bolt the tool with two bolts to a level and stable surface

using the bolt holes provided in the tool base. This will

help prevent tipping and possible injury. (Fig. 2)

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Switch action

CAUTION:

• Before plugging in the tool, always check to see that

the switch trigger actuates properly and returns to the

“OFF” position when released.

• When not using the tool, remove the lock-off button and

store it in a secure place. This prevents unauthorized

operation.

For European countries (Fig. 3)

To prevent the switch trigger from being accidentally

pulled, a lock-off button is provided. To start the tool,

depress the lever to release the handle from the fully ele-

vated position and to press in the lock-off button, and

then pull the switch trigger. Release the switch trigger to

stop.

For all countries other than European countries

(Fig. 4)

To prevent the switch trigger from being accidentally

pulled, a lock-off button is provided.

To start the tool, depress the lock-off button and pull the

switch trigger. Release the switch trigger to stop.

Setting for desired cutting angle (Fig. 5)

CAUTION:

• Always tighten the hex bolt securely after changing the

cutting angle.

To change the cutting angle, loosen the lever. Move the

vise stop so that the indicator will point to the desired

graduation. Then tighten the lever to secure the vise

stop.

Dust collection (Fig. 6)

CAUTION:

• Do not touch any part of the dust box except its handle

immediately after operation; it may be extremely hot

and could burn your skin.

This tool is equipped with the dust box to collect dust and

cut chips. When the dust box is full, hold the handle of

the dust box and raise it slightly. Then pull the dust box

out of the tool base. Empty the dust box of its contents.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Socket wrench storage (Fig. 7)

The socket wrench is stored as shown in the figure.

When using the socket wrench, pull it out of the wrench

holder. After using the socket wrench, return it to the

wrench holder.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita LC 1230 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita LC 1230

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info