Bedienungsanleitung Makita PT354D (Seite 8 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

691774

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

8 ENGLISH

Lighting up the lamp

CAUTION: Do not look in the light or see the

source of light directly.

Pull the switch trigger or actuate the contact element to

lightupthelamp.Thelampkeepsonlightingwhilepull-

ing the switch trigger or actuating the contact element.

Thelampgoesoutapproximately10secondsafter

releasing the switch trigger and the contact element.

►Fig.7: 1. Lamp

NOTE:Useadryclothtowipethedirtoffthelensof

thelamp.Becarefulnottoscratchthelensoflamp,or

it may lower the illumination.

NOTE:Eveninthelamplightsupwhenthebattery

powerresidualgetssmall,pinnailermaynotrepin

nails.Inthiscase,chargethebatterycartridge.

ASSEMBLY

CAUTION: Always make sure that your

ngers are not placed on the switch trigger or

the contact element and the battery cartridge is

removed before carrying out any work on the pin

nailer.

Loading the pin nailer

CAUTION: Always make sure that the battery

cartridge is removed before loading the pin nailer.

Unintentionalringmaycausepersonalinjuriesand

property damage.

CAUTION: Do not abruptly slide the magazine

of the pin nailer loaded with pin nails.Accidentally

dropping pin nails especially when working in high

placesmaycausepersonalinjuries.

CAUTION: Load pin nails in the correct direc-

tion. Loading in wrong direction may cause prema-

turewearandtearofthedriveranddamageofthe

other parts.

CAUTION: Do not use deformed connected

pin nails.Usepinnailsspeciedinthismanual.

Usingpinnailsotherthanthosespeciedmaycause

pinnailjammingandbreakageofthepinnailer.

1. Removethebatterycartridge.

2. Press the locking lever and slide the magazine

backward.

3. Alignthetipofpinnailswiththegroovesatthe

bottomofthemagazineandpushthewholepartofpin

nailstowardthedriverguide.(Becarefultoplacepin

nails in the right direction.)

►Fig.8: 1. Pin nails 2.Magazine3. Locking lever

4. Driver guide

4. Afterloadingpinnails,pushbackthemagazinein

place until it clicks.

Toremovepinnails,followtheinstallationprocedures

in reverse.

Nose adapter

CAUTION: Always make sure that your

ngers are not placed on the switch trigger or

the contact element and the battery cartridge is

removed before installing the nose adapter.

Whenringpinnailsonthematerialwitheasily-marredsur-

faces,usethenoseadapter.Toinstallthenoseadapter,place

it over the driver guide cover so that the protrusion inside the

noseadaptertstothedentinthedriverguidecover.

You can store the nose adapter on the holder on the

backendofthemagazinetokeepitfrombeinglost.

►Fig.9: 1. Dent 2. Protrusion 3. Nose adapter

4. Holder

Hook

CAUTION: Do not hang the hook from the

waist belt. Dropping the pin nailer, which is caused

bythehookaccidentallycomingoutofplace,may

causeunintentionalringandresultinpersonal

injuries.

►Fig.10

Thehookisconvenientfortemporarilyhangingthetool.

Thiscanbeinstalledoneithersideofthetool.

Toinstallthehook,insertitintoagrooveinthetool

housing on either side and then secure it with a screw.

Toremove,loosenthescrewandthentakeitout.

►Fig.11: 1. Groove 2. Hook 3.Screw

Hex wrench storage

When not in use, store the hex wrench as shown in the

guretokeepitfrombeinglost.

►Fig.12: 1. Hex wrench

OPERATION

Testing the safety system

WARNING: Make sure all safety systems are

in working order before operation. Failure to do

so may cause personal injuries.

►Fig.13: 1.Trigger-lockbutton2.Switchtrigger

3. Contact element 4.Magazine

Testsafetysystemsforpossiblefaultbeforeoperation

asfollows.

1. Unloadpinnailsfromthetoolandkeepthemaga-

zine opened.

Installthebatterycartridgeandreleasethetriggerlock.

3. Only pull the switch trigger without touching the

contact element against the material.

4. Only touch the contact element against the mate-

rial without pulling the switch trigger.

Ifthetooloperatesinthecaseof3and4above,the

safetysystemsarefaulty.Stopusingthetoolimmedi-

ately and ask your local service center.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita PT354D Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info