Bedienungsanleitung Makita SG 1250 (Seite 5 von 52) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Norwegisch)

448645

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISH (Original instructions)

Explanation of general view

1 Shaft lock

2Notch

3Scale

4 Clamping screw

5 Slide switch

6 Hex socket head bolt

7 Blade case

8Base

9 Shaft lock button

10 Lock nut

11 Lock nut wrench

12 Diamond wheel

13 Space ring 6 (6 mm thick)

14 Space ring 3 (3 mm thick)

15 Front handle

16 Cam

17 Dust nozzle

18 Vacuum cleaner

19 Hose

20 Hex wrench

21 Inhalation vent

22 Exhaust vent

SPECIFICATION

• Due to our continuing program of research and devel-

opment, the specifications herein are subject to change

without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE026-1

Intended use

The tool is intended for cutting tracks in concrete walls or

cutting in ferrous materials or concrete drainage chan-

nels with a diamond wheel but without using water.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

GEA010-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instructions for future refer-

ence.

GEB112-4

WALL CHASER SAFETY WARNINGS

1. The guard provided with the tool must be

securely attached to the power tool and posi-

tioned for maximum safety, so the least amount

of wheel is exposed towards the operator. Posi-

tion yourself and bystanders away from the

plane of the rotating wheel. The guard helps to

protect operator from broken wheel fragments and

accidental contact with wheel.

2. Use only diamond cut-off wheels for your power

tool. Just because an accessory can be attached to

your power tool, it does not assure safe operation.

3. The rated speed of the accessory must be at

least equal to the maximum speed marked on

the power tool. Accessories running faster than

their rated speed can break and fly apart.

4. Wheels must be used only for recommended

applications. For example: do not grind with the

side of cut-off wheel. Abrasive cut-off wheels are

intended for peripheral grinding, side forces applied

to these wheels may cause them to shatter.

5. Always use undamaged wheel flanges that are of

correct diameter for your selected wheel. Proper

wheel flanges support the wheel thus reducing the

possibility of wheel breakage.

6. Do not use worn down reinforced wheels from

larger power tools. Wheels intended for a larger

power tool are not suitable for the higher speed of a

smaller tool and may burst.

7. The outside diameter and the thickness of your

accessory must be within the capacity rating of

your power tool. Incorrectly sized accessories can-

not be adequately guarded or controlled.

Model SG1250

Wheel diameter 125 mm

Max. wheel thickness 2.1 mm

Rated speed (n) / No load speed (n

)

European countries 10,000 (min

–1

)

Other countries 9,000 (min

–1

)

Spindle thread M14

Overall length 346 mm

Net weight 4.4 kg

Safety class /II

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita SG 1250 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Makita SG 1250

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info