Bedienungsanleitung Makita UB0801 (Seite 9 von 168) (Alle Sprachen)

690556

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

OPERATING TIPS (Fig. 7)

• Assure the unit is not directed at anybody or any loose

debris before starting the unit.

• Verify that the unit is in good working condition. Make

sure the tubes and guards are in place and secure.

• Always hold the unit with both hands when operating.

• Keep a rm grip on both the front and rear handle or

grips.

• To reduce the risk of hearing loss associated with sound

level(s), hearing protection is required.

• Use the shoulder strap when using unit as a mulcher.

• Be sure the bag is installed properly and zipped closed

(when used as a mulcher).

• Operate power equipment only at reasonable hours

- not early in the morning or late at night when people

might be disturbed. Comply with times listed in local

ordinances. Usual recommendations are 9:00 am to

5:00 pm, Monday through Saturday.

• To reduce noise levels, limit the number of pieces of

equipment used at any one time.

• To reduce noise levels, operate the tool at low speed

if possible.

• Use rakes and brooms to loosen debris before

blowing.

• In dusty conditions, slightly dampen surfaces.

• Conserve water by using power blowers instead of

hoses for many lawn and garden applications, including

areas such as gutters, screens, patios, grills, porches,

and gardens.

• Watch out for children, pets, open windows or freshly

washed cars, and blow debris safely away.

• Clean up after using blowers and other equipment.

Dispose of debris appropriately.

NOTE:

• Please ensure that the Mulching Gate is completely

closed and locked.

AIR VENTS

• Never cover air vents. Keep them free from obstructions

and debris. They must always remain clear for proper

motor cooling.

WARNING:

• To avoid serious personal injury, do not wear loose

tting clothing or articles such as scarves, strings,

chains, ties, etc., that could get drawn into the air vents.

To make sure long hair does not get drawn into the air

vents, tie back long hair.

OPERATING AS A BLOWER

Hold the blower rmly. Sweep from side to side with the

nozzle several inches above the ground or oor. Slowly

advance the unit, keeping the accumulated pile of debris

in front of you. Most dry blowing operations are better

suited to low speeds, rather than high. High speed blow-

ing is a better way to move heavier items like large debris

or gravel.

OPERATING AS A MULCHER (optional

accessory)

Hold the tool rmly, tilting the mulcher tubes (5–10 cm),

and use a sweeping action to collect light debris. The

debris will ow into the bag. Items such as small leaves

and twigs will be mulched as they pass through the fan

housing. For longer bag life and increased performance,

empty the bag often.

CLEARING A BLOCKED TUBE / IMPELLER

WARNING:

• To avoid serious personal injury, be sure the unit is OFF

and unplugged before clearing the impeller.

WARNING:

• To avoid serious personal injury, always wear gloves to

protect yourself from the impeller blades or other sharp

objects.

• Slide the Power/Speed slide switch to the OFF position,

and wait until the unit comes to a complete stop.

• Unplug the unit.

• Remove the blower tube or mulcher tubes and the

bag.

• Carefully remove material blocking the tube or impeller.

Inspect the blades to ensure no damage has occurred.

Rotate the impeller blades by hand to ensure the block-

age is completely cleared.

• Reinstall the blower tube or mulcher tubes and the

bag.

• Plug the unit back into the power supply.

MAINTENANCE

WARNING:

• Never use water for cleaning your product, use only a

dry cloth. Never use gasoline, benzine, thinner, alcohol

or the like. Discoloration, deformation or cracks may

result.

• Switch off and disconnect from the mains power supply

before cleaning or checking your product.

• Always empty the collection bag.

• Always store the product in a dry place ensuring the

cable is not likely to be damaged.

CLEANING THE COLLECTION BAG

• Empty the collection bag after each use to avoid dete-

rioration and obstruction of the air ow which will reduce

the performance of the unit.

• Clean the collection bag as needed. With eye protection

on, turn the dust bag inside out after initial emptying and

vigorously shake out the dust and debris.

DISPOSAL

Waste electrical products should not

be disposed of together with household

waste. Please recycle where facilities

exist. Check with your local authority or

retailer for recycling advice.

MAINTENANCE AND STORAGE INFORMATION

Prior to cleaning or any maintenance, always ensure the

power plug has been removed from the electric power

supply. When you have nished using the tool, always

check to make sure the product is clean and free of dirt

and debris.

• Do not use solvents to clean the tool.

• Store the tool in a dry place, and out of reach of

children.

POWER CORD MAINTENANCE

If the supply cord needs replacing, the task must be car-

ried out by an authorised service centre in order to avoid

a safety hazard.

If the supply cord is damaged, it must be replaced by

Makita service center in order to avoid a hazard.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita UB0801 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info