Bedienungsanleitung Makita UR100D (Seite 9 von 104) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

690918

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

9 ENGLISH

360°

Keep bystanders away.

15m(50FT)

Keep distance at least 15 m.

Wear a helmet, goggles and ear protection.

Wear protective gloves.

Wear sturdy boots with nonslip soles.

Steeltoed safety boots are recommended.

Do not expose to moisture.

Top permissible tool speed.

Never use metal blade.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material! In observance of the

European Directives, on Waste Electric

and Electronic Equipment and Batteries

and Accumulators and Waste Batteries and

Accumulators and their implementation

in accordance with national laws, electric

equipment and batteries and battery

pack(s) that have reached the end of

their life must be collected separately and

returned to an environmentally compatible

recycling facility.

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

SAFETY WARNINGS

IMPORTANT SAFETY

INSTRUCTIONS

WARNING: Read all safety warnings and

all instructions. Failure to follow the warnings and

instructionsmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

1. Be familiar with the controls and proper use of

the equipment.

2. Cutting elements continue to rotate after the

motor is switched off.

3. Never allow children or people unfamiliar with

the instructions to use the machine. Local reg-

ulations may restrict the age of the operator.

4. Stop using the machine while people, espe-

cially children, or pets are nearby.

5. Only use the machine in daylight or good

articial light. Avoid using the machine in bad

weather conditions especially when there is a

risk of lightning.

6. Before using the machine and after any

impact, check for signs of wear or damage and

repair as necessary.

7. Take care against injury from any device

tted for trimming the lament line length.

After extending new cutter line always return

the machine to its normal operating position

before switching on.

8. Never t metal cutting elements.

9. This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they

have been given supervision or instruction

concerning use of the appliance by a person

responsible for their safety. Children should be

supervised to ensure that they do not play with

the appliance.

10. Use the tool with the utmost care and

attention.

11. Operate the tool only if you are in good phys-

ical condition. Perform all work calmly and

carefully. Use common sense and keep in mind

that the operator or user is responsible for

accidents or hazards occurring to other people

or their property.

12. Never operate the tool when tired, feeling ill or

under the inuence of alcohol or drugs.

13. The tool should be switched off immediately if

it shows any signs of unusual operation.

14. Keep ngers away from switch trigger when

not operating the tool and when moving from

one operating position to another.

Intended use of the tool

1. Use right tool. The cordless grass trimmer is

only intended for cutting grass, light weeds. It

should not be used for any other purpose such

as hedge cutting as this may cause injury.

Personal protective equipment

►Fig.1

►Fig.2

1. Dress Properly. The clothing worn should be

functional and appropriate, i.e. it should be

tight-tting but not cause hindrance. Do not

wear either jewelry or clothing which could

become entangled with high grass. Wear pro-

tective hair covering to contain long hair.

2. When using the tool, always wear sturdy shoes

with a non-slip sole. This protects against

injuries and ensures a good footing.

3. Always wear protective goggles to protect

your eyes from injury when using power tools.

The goggles must comply with ANSI Z87.1 in

the USA, EN 166 in Europe, or AS/NZS 1336

in Australia/New Zealand. In Australia/New

Zealand, it is legally required to wear a face

shield to protect your face, too.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita UR100D Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info