Bedienungsanleitung Makita VC009G (Seite 19 von 172) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

793656

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

19 ENGLISH

1. Shoulder the vacuum cleaner body and fas-



necessary.

Fig.31

2. Press

button to start vacuuming. If you want

to change the suction power, press button until the

desired suction power is selected. Press button to

stop.

Fig.32

During the operation, hook the switch box on the lower

belt or the D-ring.

Fig.33

3. 







Fig.34: 1. Strip

When using a dust bag, take out the dust bag and dis-

pose of the dust by releasing the latch.

Fig.35: 1. Latch

NOTICE: 

full.

reduced suction power.

NOTICE: 

-



damage to the cleaner. If you want to use the bag

repeatedly, use a dust bag.

WIRELESS ACTIVATION

FUNCTION

What you can do with the wireless

activation function

The wireless activation function enables clean and

comfortable operation. By connecting a supported tool

to the cleaner, you can run the cleaner automatically

along with the switch operation of the tool.

Fig.36

NOTICE: Be sure to refer to the instruction man-

ual of the tool when using the cleaner with wire-

less activation function.

NOTICE: Do not disassemble or tamper with the

wireless unit.

NOTICE: To prevent dust coming into the slot

of the wireless unit, always close the lid securely

during operation and storage.

NOTICE: Do not remove the wireless unit while

the power is being supplied. Doing so may cause a

malfunction of the wireless unit.

NOTICE: Do not press the wireless activation

button too hard and/or press the button with an

object with a sharp edge.

NOTE: Wireless activation needs Makita tools

equipped with the wireless unit.

NOTE: Prior to the initial use of the wireless activa-

tion function with each tool, the tool registration is



tool, the re-registration is not required unless it is

cancelled.

NOTE: Before registration, be sure that the wireless

unit is properly inserted.

NOTE: One wireless unit can register up to 10 links

with other wireless units. If more than 10 other wire-

less units are registered to one wireless unit, the one

registered earliest will be cancelled automatically.

NOTE: The position of the wireless activation button

varies depending on the tool.

NOTE: The cleaner also starts by pressing button

when the stand-by switch is set to " I (ON)".

However the button will not work when the wire-

less activation function is used.

Installing the wireless unit

CAUTION: 

stable surface when installing the wireless unit.

NOTICE: Clean the dust and dirt on the cleaner

before installing the wireless unit. Dust or dirt

may cause malfunction if it comes into the slot of the

wireless unit.

NOTICE: To prevent the malfunction caused by

static, touch a static discharging material, such

as a metallic part, before picking up the wireless

unit.

NOTICE: When installing the wireless unit,

always be sure that the wireless unit is inserted

in the correct direction and the lid is completely

closed.

1. 

Fig.37: 1. Lid

2. Insert the wireless unit to the slot and then close

the lid.



with the recessed portions on the slot.

Fig.38: 1. Wireless unit 2.3. Lid

4. Recessed portion

When removing the wireless unit, open the lid slowly.

The hooks on the back of the lid will lift the wireless unit

as you pull up the lid.

Fig.39: 1. Wireless unit 2. Hook 3. Lid

After removing the wireless unit, keep it in the supplied

case or a static-free container.

NOTICE: Always use the hooks on the back of

the lid when removing the wireless unit. If the

hooks do not catch the wireless unit, close the lid

completely and open it slowly again.

Makita VC009G Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info