Bedienungsanleitung Makita VC009G (Seite 23 von 172) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

793656

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

23 ENGLISH

State of abnormality Probable cause (malfunction) Remedy

The cleaner does not run along with

the switch operation of the tool.

The wireless unit is not installed into the

cleaner and/or the tool.

The wireless unit is improperly installed

into the cleaner and/or the tool.

Install the wireless unit correctly.

The terminal of the wireless unit and/or

the slot is dirty.

󰀨

wireless unit and clean the slot of the cleaner and/

or the tool.

The wireless activation button on the

tool have not been pushed.

Push the wireless activation button on the tool



is blinking in blue.

The stand-by switch on the cleaner is

not set to " I (ON)".

Set the stand-by switch on the cleaner to " I (ON)".

More than 10 tools are registered to

the cleaner.

Perform the tool registration again.

If more than 10 tools are registered to the cleaner,

the tool registered earliest will be cancelled

automatically.

The cleaner erased all tool

registrations.

Perform the tool registration again.

No power supply Supply the power to the tool and the cleaner.

The tool and cleaner are away from

each other (out of the transmission

range).

Get the tool and the cleaner closer to each other.

The maximum transmission distance is approxi-

mately 10 m however it may vary according to the

circumstances.

Radio disturbance by other appliances

which generate high-intensity radio

waves.

Keep the tool and the cleaner away from the appli-

ances such as Wi-Fi devices and microwave ovens.

The cleaner runs while the tool is not

operating.

Other users are using the wireless acti-

vation of the cleaner with their tools.

Perform one of the following way;

- set the stand-by switch on the cleaner to "O"

position or;

󰀨

tools or;

- cancel the tool registration of the other tools.

Cannot erase all tool registrations in

the cleaner.

Pressing the wireless button on the tool. Press the wireless button on the cleaner for erasing

all tool registrations.

The stand-by switch on the cleaner is

not set to " I (ON)".

Set the stand-by switch on the cleaner to " I (ON)".

The wireless activation button is not

held down correctly.

Hold down the wireless activation button for more

than 6 seconds and then release it when the wire-

less activation lamp blinks in red. Hold down the

wireless activation button for more than 6 seconds

again until the wireless activation button rapidly

blinks in red and then release the button.

MAINTENANCE

CAUTION: Always be sure that the appli-

󰀨

removed before attempting to perform inspection

or maintenance.

NOTICE: Never use gasoline, benzine, thinner,

alcohol or the like. Discoloration, deformation or

cracks may result.

To maintain product SAFETY and RELIABILITY,



be performed by Makita Authorized or Factory Service

Centers, always using Makita replacement parts.



CAUTION: Do not use the vacuum cleaner





may be exhausted from the cleaner and they may

cause respiratory disease to the operator.

NOTICE: To keep optimum suction power and



enough suction power is not obtained even after



NOTICE: 

damaged, do not use following tools and similar

items for cleaning :

— Air duster

— High pressure washer

— Tools made of hard materials such as a

metallic brush

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita VC009G Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info