Bedienungsanleitung Makita VC009G (Seite 24 von 172) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch)

793656

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

24 ENGLISH

1. 



vacuum cleaner body.

Fig.49

2. 󰀨







and well-ventilated place to prevent unpleasant odor or

malfunctions.

3. 





Fig.50: 1. Holder 2.3. Rib 4. Flap

Cleaning the dust bag

Regularly clean the dust bag with soap and water. Turn

the dust bag inside out and remove the sticky dust.

Wash lightly by hand and rinse well with water. Dry

completely before installing to the vacuum cleaner.

Fig.51

NOTICE: Wet dust bag lowers the vacuuming per-

formance as well as the life of the motor.

Cyclone attachment

Optional accessory

NOTE: When using the cyclone attachment with this

appliance, the bent pipe is also required.

Fig.52: 1. Cyclone attachment

About the cyclone attachment

Using the cleaner with the cyclone attachment installed

reduces the amount of dust that enters the dust bag,

which helps to prevent the suction force from weaken-

ing. In addition, cleaning after use is also simple.

CAUTION: Always be sure that the tool is

󰀨

before carrying out any work on the tool. If the

battery cartridge is left inserted, the cleaner may start



CAUTION: 

cyclone attachment and the dust bag of the

cleaner unit when they become clogged.

Continued use in the clogged condition may result in

heating or smoke.

NOTICE: When the cyclone attachment is

attached, do not use the cyclone attachment in

the horizontal or upward facing condition. Doing



NOTICE: Always use the cleaner with the dust

bag installed, even when using the cyclone

attachment. Using the cleaner without the dust bag

installed may result in a motor malfunction.

NOTE: Check that the cyclone attachment, cleaner,

and straight pipe are locked properly before use.

NOTE: Empty the dust case of the cyclone attach-

ment and the dust bag of the cleaner when dust has

accumulated. Continued use will result in weakened

suction force.

NOTE: You can use the cyclone attachment with or

without lock function.

NOTE: To install or remove the cyclone attachment,

refer to the section "Using as a cleaner".

Disposing of dust

When dust has accumulated up to the full line of the

dust case, follow the procedure below and dispose of

the dust.

1. 

buttons, and remove the dust case.

Fig.53: 1. Full line 2. Dust case 3. Button (two

locations) 4.

2. Dispose of the dust inside the dust case and

remove any dust and powder adhered to the surface of



3. Insert the dust case all the way until the two but-

tons lock with a click.

Fig.54: 1. Dust case 2. Button (two locations)

NOTE: Check that the cyclone attachment, cleaner,

and straight pipe are locked properly before restarting

operation.

NOTE: If the suction force does not recover even

after disposing of the dust and cleaning the mesh



bag of the cleaner or clogging has occurred.

Cleaning



clogged, remove and wash them with water. (Refer to

“Disposing of dust” for the removal procedure.)

Dry the parts thoroughly before reinstallation and use.

Fig.55: 1. Dust case 2.



following procedures.

1. 

it while the hooks are unlocked.

Fig.56: 1.2. Hook

2. 

it with water. After that, dry it thoroughly.

3. 



until the hooks are locked with a click. Make sure that



Fig.57: 1.2. Hook 3. Port

Makita VC009G Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info