Bedienungsanleitung Makita VC2510L (Seite 10 von 68) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch)

598792

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

32. Use a dust mask in dusty work conditions.

33. This machine is not intended for use by persons

including children with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge.

34. Young children should be supervised to ensure

that they do not play with the cleaner.

35. Never handle plug cord or cleaner with wet hands.

36. Use extreme caution when cleaning on stairs.

37. Do not use the cleaner as a stool or work bench.

The machine may fall down and may result in

personal injury.

KEEP FOR FUTURE REFERENCE

WARNING:

DO NOT let comfort or familiarity with product (gained

from repeated use) replace strict adherence to safety

rules for the subject product. MISUSE or failure to

follow the safety rules stated in this instruction

manual may cause serious personal injury.

FUNCTIONAL DESCRIPTION

WARNING:

• Before plugging the cleaner, always make sure that

the cleaner is switched off. Plugging the cleaner with

the switch on may cause an unexpected start resulting

in serious personal injury.

Switch action (Fig. 1)

To start the cleaner, rotate the switch lever to the “I” side.

To stop it, rotate the switch lever to the “O” side.

The suction power can be adjusted according to your

work need. (Fig. 2)

Suction power can be increased by turning the suction

force adjusting knob from the symbol to the

symbol.

Connecting electric power tools

WARNING:

• Observe the maximum connected loads for the

appliance socket (Refer to the SPECIFICATIONS.)

• Make sure that both the cleaner and the electric power

tool are switched off before connecting or

disconnecting. Connecting the power tool to the

cleaner with both of them being switched on may cause

unexpected and sudden start resulting serious

personal injury.

When connecting a grounded tool, insert a plug with a

grounding plate to the socket of the cleaner. (Fig. 3)

CAUTION:

• Never connect an electric power tool with an input

power exceeding that specified in the

“SPECIFICATIONS” to the socket of the cleaner by

turning the suction force adjusting knob. Connecting

the electric power tool exceeding the specified input

power may cause overheat and damage to the cleaner.

Refer to the specifications to avoid this.

The cleaner can be connected to an electric power tool up

to input power shown in the “SPECIFICATIONS”.

To connect an electric power tool, open the cap and insert

the power tool plug into the socket of the cleaner.

Rotate the switch lever to the “AUTO” position. (Fig. 2)

Move the suction force adjusting knob to the position

suitable for the input power of the electric power tool you

intend to use. Refer to the SPECIFICATIONS for the

relation between suction force adjusting knob and the

electric power tool input power.

Switching on and off of the connected electric power tool

simultaneously brings the cleaner switching on and off

action. The cleaner still works for a few seconds even

after the electric power tool is switched off.

After use, disconnect the power tool from the socket of

cleaner.

Switch off the cleaner after use.

Auto-suction stop during suction

operation

WARNING:

• Do not use for a long time while the float is at work.

Using the cleaner with its float at work for a long time

can cause overheat, resulting in the cleaner

deformation.

• Do not pick up foam or soapy liquid. Picking up

foam or soapy liquid can cause foam to come out of air

exit before the float works. Continuing to using in this

condition may cause an electric shock and breakage of

the cleaner.

The cleaner has a float mechanism that prevents water

from immersing into the motor when picking up more than

a certain amount of water.

When the tank is full and the cleaner no longer picks up

water, switch off the cleaner and empty the tank.

Installing the holder (Fig. 4)

When connecting an electric power tool, secure the power

supply cord and hose using the holders at a 70 cm -

80 cm distance among the holders that are provided with

the cleaner so that the hose is not entangled by the power

supply cord.

Usage of base hook

CAUTION:

• Be careful not to pinch your fingers when closing

the base hook. Failure to do so may cause personal

injury.

NOTE:

• Do not apply an excessive force on the base hook. The

excessive force on the base hook may damage the

base hook. Close the base hook when not in use.

Opening the base hook allows the following usage.

1. Storing the power supply cord

NOTE:

• Do not use the cleaner or a connected electric

power tool with a power supply cord wound on the

base hook. Using the cleaner or the connected electric

power tool with power supply cord may cause damage

the power supply cord. (Fig. 5)

2. Storing the front cuffs

Front cuffs 22, 24 and 38 can be stored (up to two at a

time.) (Fig. 6)

3. Storing the hose (Fig. 7)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Makita VC2510L Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info