Bedienungsanleitung Mamiya 645 AFD III (Seite 43 von 56) (Englisch)

494220

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

83 84

★ When using an SCA300 system flash (Metz 60CT-4, 45CL-4, etc.), use the SCA3000C

converter (sold separately).

★ For details, refer to the operating instructions of the flash and the SCA adapter.

★ To use the guide number indicated on the flash fully, wait several seconds after the

charging completed indicator lights.

★ Cautions on using instant film

Instant films (Polaroid 100-600 series and Fuji FP series), have a lower reflectivity

rate than regular film. Exposure compensation is necessary when using the flash in

the TTL mode.

In general, set the exposure compensation to about minus 1 or 1 1/3 EV.

Metz Flash SCA3952 System Functions

1. While in the P or Av modes, the camera can be set to release the

shutter at the metered value, even if the background behind the

subject is dark. Custom settings (C-24 on page 95)

2. The sync. speed in the X mode can be set between 1/40 and 1/125

seconds. Custom settings (C-23 on page 95)

* When the shutter speed is set to 1/2 increments, the sync. speed can be set between 1/45 and 1/125

seconds.

For example:

(1) When the size of the subject you want to light with the flash is relatively small within the

picture

(2) When the background behind the subject is extremely bright or when there is a strongly

reflective object in the background

(3) When the background behind the subject is extremely dark (outdoors at night, etc.)

(4) For flash photography with a narrow film latitude

Charging completed

indicator in viewfinder

Automatic setting of

flash synchronizing

speed

Flash confirmation

Auto zoom control

Auto AF assist beam

Display of flash range

(distance)

Data transfer

When charging of the flash is completed, a charging completed flash

icon

will illuminate in the viewfinder’s liquid crystal display panel.

When exposure mode is set at “Av ” or “P”, the shutter speed will be

automatically set to 1/60 to 1/125 sec. when charging of the flash is

completed.

When exposure mode is at “Tv” or “M” and the shutter speed is at

faster than 1/125 sec., the shutter speed will be automatically set to

1/125 sec.

The flash charge mark flashes after the shutter is released to

indicate that the flash was emitted properly.

The power zoom reflector is linked to the lens focal length. (Exclud-

ing the Metz 32Z-2)

When the focus mode is set to “S”, the auto focus assist beam is

emitted automatically in low light. (Excluding the Metz 32Z-2)

Displayed on the flash’s liquid crystal display panel. (Excluding the

Metz 32MZ-3 and Metz 32Z-2)

The film sensitivity data, exposure compensation data and aperture

data are sent from the camera to the flash.

Rear Curtain Sync Mode

When a moving subject has been shot under this function, the flash of light appears after

the moving subject.

This function is set by Custom function setting.

Custom setting (C-27 on page 95)

Rear curtain sync mode Front curtain sync mode

Flash Photography (continued)

/ Rear Curtain Sync Mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mamiya 645 AFD III Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info