EnglishDeutsch Page 39
To change and insert the battery, open the cover.
When changing the battery, be sure to pole correctly.
Batteries are not covered by the guarantee.
Attention:
Only operate the hand transmitter when certain that neither persons
nor objects are located within the door's range of travel.
Keep hand transmitters well out of the reach of children!
Learning the code:
It is necessary to programme the two hand transmitters with the same code.
Step 1:
Connect both hand transmitters using the enclosed programming cable.
Step 2:
Operate the left hand transmitter and keep the button depressed.
Step 3:
Operate the right hand transmitter while keeping the button on the left transmitter depressed.
Programming is completed after approx. 2 secs. Remove the programming cable.
Altering the code:
In the event that a hand transmitter gets lost, it is possible to reprogramme the system with a
new code.
To do this, connect the programming cable to the hand transmitter to be reprogrammed.
Step 4:
Short-circuit one of the two outer wires of the programming cable using the middle wire.
Operate the hand transmitter for at least 5 secs. A new code is established via random
programming whereby the LED flashes rapidly. For multi-channel transmitters this procedure
must be carried out individually for every single button.
Once the LED on the hand transmitter constantly glows, the transmitter button can be released
and the cable removed. The recoding procedure is now completed.
Attention:
After recoding the hand transmitter, the garage door operator must also be
reprogrammed for the new code, since the old code has been irretrievably lost.
O
17
Seite 26
+
-
Programmierung externe Lichtschranke
Betriebszustand (falls das Tor sich im Zustand ‘Offen’ oder ‘Geschlossen’ befindet, leuchten die
entsprechenden Anzeigen 2 bzw. 4 ebenfalls)
Erlöschen aller Anzeigen in der Reihenfolge 8-1.
Dann wechselt die Steuerung in den Betriebszustand.
+
-
Programmierung ‘Endlage Auf’
+
-
Programmierung ‘Endlage Zu’
+
-
Programmierung ‘Abschaltautomatik Auf’
+
-
Programmierung ‘Abschaltautomatik Zu’
Programmierung Funksteuerung
Kurzprogrammieranleitung für Fachpersonal
