8. Initial operation
8.4 Reference point
In operating mode, LED 5 lights up briefly
when an object/person passes the reference
point.
Advice:
In the factory default setting and after
a reset, the controls are set to start in
the CLOSED gate position.
To ensure trouble-free programming,
therefore, the gate and the operator
system must be in the CLOSED end
position before resetting or carrying out
the express programming procedure.
Photocell or the CESD has been interrupted
(display: master only)
Gate moving towards OPEN position
(display: master and slave)
Gate in OPEN position
(display: master and slave)
Gate moving towards CLOSED position
(display: master and slave)
Gate in CLOSED position
(display: master and slave)
Reference point is switched
(display: master and slave)
Permanent actuation of an external control
element (display: master only)
Remote control is actuated
(display: master only)
Operating voltage
(display: master and slave)
LED displays in operating mode
Legend:
LED off
LED on
LED flashes slowly
LED pulses
LED flashes quickly
Factory default setting
Not possible –
8.3 Overview of the display functions
Operating Instructions, Comfort 580 GB (#91636) 29
