37760
19
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
16
ENGLISH
PROGRAM PLAY
(PLAYING TRACKS IN THE
PREFERRED SEQUENCE)
The order in which the CD tracks are played can
be rearranged into the sequence desired. Up to 30
tracks can be programmed.
7
Program play in the time display
mode
In the case of a CD-TEXT disc, first press the TIME
button on the remote control unit to set the main
display to the time display mode.
TEXT
12 34 56 78 910 1112 1314 1516 1718
TTL
TTL
TIME
1. During stop, press the PROGRAM button on the
remote control unit.
“Program” appears for an instant on the main
display.
TEXT
PROG
Flashes
The PROG indicator flashes, and the program
mode is established.
TEXT
TTL
TTL
TIME
PROG
Flashes
2. Press the numeric buttons on the remote
control unit the tracks can also be selected
using the 4 and ¢ buttons on the remote
control unit or 4/1 and ¡/¢ buttons on
the player. To select track number 10 or above,
use the numeric buttons to select the higher
digit first and then select the lower digit.
Display example: When track 2 has been
selected
TEXT
2
TTL
TRK
TTL
TIME
PROG
Flashes
3. Repeat step 2 to program the desired tracks in
sequence. At each step of the programming,
the number of tracks programmed and their
total time appear on the main display. Up to 30
tracks can be programmed.
TEXT
246810
TTL
TRK
TTL
TIME
PROG
Flashes
3. Press the ENTER button of the remote control.
The currently time setting will be displayed
(at the time of purchase, this is set to 10
seconds).
4. Set the desired time with the 4 or ¢ buttons
(5 - 60 s).
5. After setting the time, press the ENTER button.
The display will return to normal.
Note:
If there is a period of more than 4 seconds during
this procedure in which a key is not pressed, the
setting at that time will be set, and the display will
return to displaying the time.
If the POWER button on the CD player or the
POWER button on the remote control is pressed,
even if the machine goes into STANDBY, the
most recently-set time will be kept. In the event
of the power cord being removed from the player
or from the power supply outlet, the setting will
revert to the default (10s).
ADVANCED OPERATIONS –AUDIO CD–
CD6002N_01_ENG.indd 16CD6002N_01_ENG.indd 16 07.6.20 1:09:16 PM07.6.20 1:09:16 PM
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Marantz CD6002 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info