37760
20
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
17
ENGLISH
ADVANCED OPERATIONS –AUDIO CD–
4. Once all the tracks have been programmed,
press the 7 button on the player or remote
control unit or press the PROGRAM button on
the remote control unit.
The PROG indicator stops flashing and lights
up instead, and the program is entered.
TEXT
246810
TTL
TTL
TIME
PROG
Light up
5.
Press the 3 button on the player or remote
control unit. Play now starts in the programmed
sequence.
Program play will start even when step 4 is
omitted.
7
Program play in the text display
mode
In the case of a CD-TEXT disc, tracks can be
selected by title for program play.
If the main display is set to the time display mode,
press the TEXT button on the remote control unit to
establish the text display mode.
TEXT
12 34 56 78 910 1112 1314 1516 1718 19
1. During stop, press the PROGRAM button on the
remote control unit.
“Program” appears for an instant on the main
display. Then the PROG indicator flashes, and
the program mode is established.
TEXT
PROG
Flashes
2. Press the 4 and ¢ buttons on the remote
control unit or 4/1 and ¡/¢ buttons on
the player to select the track. (The track can
also be selected using the numeric buttons on
the remote control unit but in this case the title
is not displayed).
The title of each selected track is scrolled, and
once it has been scrolled, it is programmed
automatically. If you do not want to program the
track, select another track before the scrolling is
completed.
TEXT
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
3. Repeat step 2 to program the desired
tracks in sequence. Up to 30 tracks can be
programmed.
4. Once all the tracks have been programmed,
press the 7 button on the player or remote
control unit or press the PROGRAM button on
the remote control unit.
The PROG indicator stops flashing and lights
up instead, and the program is entered.
TEXT
246810
TTL
TTL
TIME
PROG
Light up
5. Press the 3 button on the player or remote
control unit. Play of the selected tracks now
starts in the programmed sequence.
Program play will start even when step 4 is
omitted.
Note:
Programming in the text display mode cannot
be performed for tracks which have no text
information for their titles.
CD6002N_01_ENG.indd 17CD6002N_01_ENG.indd 17 07.6.20 1:09:16 PM07.6.20 1:09:16 PM
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Marantz CD6002 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info