Bedienungsanleitung Marantz PM-4001 (Seite 9 von 15) (Englisch)

6538

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

ENGLISH

NAMES AND FUNCTIONS OF PARTS

FRONT PANEL

qwe r ytu

io!0!1!2!3!4

q POWER SWITCH

Pressing once switches the power ON, and pressing again

switches it OFF.

If the POWER switch is in the ON position, the power of this

unit can be turned ON/OFF by pressing the POWER

button on the remote control unit.

w STANDBY INDICATOR

Lights up when the unit is in the standby mode.

e INPUT SELECTOR

Selects the program source to be recorded or played from

the PHONO, CD, TUNER, AUX/DVD, RECORDER 1

(CD-R), and RECORDER 2 (MD/TAPE).

r TONE DEFEAT SWITCH

• When the switch is not depressed, the audio signals are

applied to the tone control circuit and the tone can be

adjusted using the tone control knob.

• When the switch is depressed, the audio signals bypass

the tone control circuit and the balance control circuit.

Then, the tone control knob and the balance control

knob do not function.

t FUNCTION INDICATORS

One of the indicators lights up to indicate the input source

selected with the INPUT SELECTOR.

y MUTING INDICATOR

Light up when the MUTING button in the remote control

unit is pressed.

NOTE:

Be sure to check the VOLUME control setting before

pressing this switch to cancel muting. If the muting is

canceled while the volume setting is high, the speakers

could be damaged.

u VOLUME CONTROL

Adjusts the volume level. Turn the knob clockwise to

increase the volume.

i LOUDNESS SWITCH

The LOUDNESS switch compensates for human hearing

characteristics by boosting the bass and treble response at

low volume levels to achieve a more pleasing tonal balance.

o SPEAKERS 1 / 2 SWITCHES

These switches are used to select the speaker system(s)

connected to the SPEAKER SYSTEM 1 / 2 terminals on

the rear panel. If both the 1 and 2 switches are pressed to

the low positions, two speaker systems can be used at the

same time.

When headphones are used for listening, set both switches

1 and 2 to OFF (high positions).

!0 BALANCE CONTROL

Turn the knob to correct an unbalanced program source

such as stereo broadcast or to vary the output level of the

left or right channel. Note that, if the BALANCE control is

turned fully in one direction, the sound will not be heard

from the speaker on the other side.

!1 BASS AND TREBLE TONE CONTROLS

Adjusts the tone by controlling the levels of two frequency

bands. Turn each control toward (+) to enhance the

corresponding frequency band, or toward (–) to attenuate

it.

TREBLE: Adjusts the high frequency level.

BASS: Adjusts the low frequency level.

!2 REC SELECTOR SWITCH

Selects the tape dubbing mode between tape decks or the

signal output at the REC OUT jacks.

!3 REMOTE SENSOR

The remote sensor receives the infrared commands from

the remote control unit. When an infrared signal is received

from the remote control unit. The remote control unit must

always be pointed directry at the remote sensor.

!4 PHONES JACK

Insert the standard phone plug of the headphones into this

jack.

PM4001N 01 ENG_02 05.7.12, 1:10 PMPage 4 Adobe PageMaker 6.5J/PPC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz PM-4001 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info