Bedienungsanleitung Marantz PM-4001 (Seite 11 von 15) (Englisch)

6538

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

ENGLISH

NAMES AND FUNCTIONS OF PARTS

í Loading batteries

Before using the supplied remote control unit for the first time,

load the batteries in the remote control unit. The batteries pro-

vided are used to verify the operations of the remote control

unit only.

(1) Remove the battery cover.

(2) Insert batteries with correct ª/· orientation.

(3) Close the battery cover until it clicks shut.

USING THE REMOTE CONTROL UNIT

í Remote control

Operate the remote control unit within a distance of approx. 5

m from the infrared signal reception window (remote sensor)

on the front of the Amplifier.

Remote control operation may not be possible if the remote

control unit’s transmitter is not pointing in the direction of the

remote sensor or if there is an obstruction between the

transmitteote sensor.

Remote control operating range

Remote control unit

Rear side

Two “AA” size

batteries

c. SOURCE POWER button

Switching the mode of a CD player, tuner, CD-R or other

Marantz component equipped with a power standby

function between power-on and standby is enabled by

pressing this button after the FUNCTION SELECT button

corresponding to the component has been pressed.

When this button is pressed after pressing the TUNER

button, the tuner’s power is turned on; when it is pressed

again, the tuner is set to the standby mode.

When this button is pressed after pressing the AMP

button, the PM4001 is switched from the power-on mode

to the standby mode or vice versa.

x FUNCTION SELECT button

PHONO button : When this button is pushed the input of

PHONO is selected.

CD button : When this button is pushed the input of

CD is selected.

TUNER button : When this button is pushed the input of

TUNER is selected.

RECORDER 1

(CD-R) button : When this button is pushed the input of

CD-R is selected.

AUX button : When this button is pushed the input of

AUX/DVD is selected.

DVD button : When this button is pushed the input of

AUX/DVD is selected.

RECORDER 2

(TAPE) button : When this button is pushed the input of

MD/TAPE is selected.

(MD) button : When this button is pushed the input of

MD/TAPE is selected.

CAUTION:

A pair of input jacks is used as the common input jacks for

the MD or TAPE input and another pair is used as the

common input jacks for the DVD or AUX input. The reason

an independent button is used for each input is that the

codes used by the RC4001PM to control the MARANTZ

MD recorder, tape deck and DVD recorder are different.

c VOLUME UP/DOWN button

UP button : VOLUME knob turns when this button

is pushed and the volume level is

grows.

DOWN button : VOLUME knob turns when this button

is pushed and the volume level is falls.

v MUTE button

When this button is pushed, the sound is not temporarily

emitted from the speakers.

When this button is pushed again, MUTE is released.

Moreover, when up/down of the volume is operated by

remote control, MUTE is released.

Other buttons are not applied to PM4001.

Please see at the owners manual of other equipment’s

about the operation of button.

Approx. 5 m

Amplifier

Remote control unit

60°

PM4001N 01 ENG_02 05.7.6, 0:06 PMPage 6 Adobe PageMaker 6.5J/PPC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz PM-4001 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info