Bedienungsanleitung Marantz PM6002 (Seite 8 von 18) (Englisch)

522814

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

ENGLISH

NAMES AND FUNCTIONS OF PARTS

FRONT PANEL

qwe r ytu

io!0!1!2!3!4

q POWER SWITCH

Pressing once switches the power ON, and

pressing again switches it OFF.

If the POWER switch is in the ON position,

the power of this unit can be turned ON/OFF

by pressing the POWER button on the remote

controller.

w STANDBY INDICATOR

Lights up when the unit is in the standby mode.

e INPUT SELECTOR

Selects the program source to be recorded or

played from the PHONO, CD, TUNER, AUX/

DVD, RECORDER 1 (CD-R), and RECORDER

2 (MD/TAPE).

r SOURCE DIRECT SWITCH

• When the switch is not depressed, the audio

signals are applied to the tone and balance

control circuit, enabling the tone and balance

to be adjusted using the knobs.

• When the switch is depressed, the audio

signals bypass the tone control circuit and

the balance control circuit. Then, the tone

control knob and the balance control knob

do not function.

t FUNCTION INDICATORS

One of the indicators lights up to indicate

the input source selected with the INPUT

SELECTOR.

y MUTING INDICATOR

Light up when the MUTING button in the remote

controller is pressed.

NOTE:

Be sure to check the VOLUME control

setting before pressing this switch to cancel

muting. If the muting is canceled while the

volume setting is high, the speakers could

be damaged.

u VOLUME CONTROL

Adjusts the volume level. Turn the knob clockwise

to increase the volume.

i LOUDNESS SWITCH

The LOUDNESS switch compensates for

human hearing characteristics by boosting the

bass and treble response at low volume levels

to achieve a more pleasing tonal balance.

o SPEAKERS 1 / 2 SWITCHES

These switches are used to select the speaker

system(s) connected to the SPEAKER SYSTEM

1 / 2 terminals on the rear panel. If both the 1

and 2 switches are pressed to the low positions,

two speaker systems can be used at the same

time.

When headphones are used for listening, set

both switches 1 and 2 to OFF (high positions).

!0 BALANCE CONTROL

Turn the knob to correct an unbalanced program

source such as stereo broadcast or to vary the

output level of the left or right channel. Note

that, if the BALANCE control is turned fully in

one direction, the sound will not be heard from

the speaker on the other side.

!1 BASS AND TREBLE TONE

CONTROLS

Adjusts the tone by controlling the levels of two

frequency bands. Turn each control toward (+)

to enhance the corresponding frequency band,

or toward (–) to attenuate it.

TREBLE: Adjusts the high frequency level.

BASS: Adjusts the low frequency level.

!2 REC SELECTOR SWITCH

Selects the tape dubbing mode between tape

decks or the signal output at the REC OUT

jacks.

!3 REMOTE SENSOR

The remote sensor receives the infrared

commands from the remote controller. When

an infrared signal is received from the remote

controller. The remote controller must always be

pointed directry at the remote sensor.

!4 PHONES JACK

Insert the standard phone plug of the

headphones into this jack.

PM6002N_01_ENG.indd 4PM6002N_01_ENG.indd 4 07.7.18 9:56:13 AM07.7.18 9:56:13 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Marantz PM6002 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info